22-01-3047 Molex Inc, 22-01-3047 Datasheet - Page 4

• Manufacturer Part Number: 22-01-3047
• Description: CONN HOUS 4POS .100 W/RAMP/RIB
• Manufacturer: Molex Inc
• Series: KK® 2695r

Specifications of 22-01-3047

• Pitch: 0.100" (2.54mm)
• Number Of Rows: 1
• Connector Type: Receptacle
• Contact Type: Female Socket
• Number Of Positions: 4
• Mounting Type: Free Hanging (In-Line)
• Contact Termination: Crimp
• Fastening Type: Ramp
• Color: White
• Features: Polarizing Key
• Note: Contacts Not Provided
• Product Type: Receptacles / Sockets - Housings
• Contact Gender: Socket (Female)
• Number Of Positions / Contacts: 4
• Mounting Style: Wire
• Mounting Angle: Vertical
• Termination Style: Crimp
• Housing Material: Nylon
• Voltage Rating: 250 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Row Spacing: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 0022-01-3047; 0022-01-3047-C; 0022013047; 0022013047-C; 22-01-3047-C; 22-01-3047-P; 22013047; 22013047-C; WM2002

REVISION:
DOCUMENT NUMBER:
P3
5.2 MECHANICAL REQUIREMENTS
DESCRIPTION
Connector Mate
Retention Force
(into PCB Hole)
Unmate Forces
Insertion Force
Insertion Force
Kinked PC Pin
(into Housing)
Pullout Force
(Mechanical)
(in Housing)
PS-10-07
(Random)
ECR/ECN INFORMATION:
EC No:
Durability
Vibration
Terminal
Terminal
DATE:
Normal
(Axial)
Shock
Force
Wire
and
UCP2008-0956
11/6/2007
PRODUCT SPECIFICATION
Per circuit when mated to an .025 Sq. pin.
Mate and unmate connector (male to female)
at a rate of 25 ± 6 mm (1 ± ¼ inch) per
minute.
Axial pullout force on the terminal in the
housing at a rate of 25 ± 6 mm (1 ± ¼ inch)
per minute. (Forces will change with platings
and materials.)
Mate connectors up to 25 cycles at a
maximum rate of 10 cycles per minute prior
to Environmental Tests.
Mate connectors and vibrate per EIA 364-28,
test condition VII.
Apply a perpendicular force.
Apply an axial insertion force on pins at a
rate of 25 ± 6 mm (1 ± ¼ inch) per minute.
TEST CONDITION
Apply an axial insertion force on the terminal
at a rate of 25 ± 6 mm (1 ± ¼ inch) per
minute. (Forces will change with platings and
materials.)
Mate connectors and shock at 50 g's with ½
sine wave (11 milliseconds) shocks in the
±X,±Y,±Z axes (18 shocks total).
Apply an axial pullout force on the wire at a
rate of 25 ± 6 mm (1 ± ¼ inch) per minute.
(For maximum performance use Molex
application tooling with stranded tinned
copper wire)
TITLE:
CREATED / REVISED BY:
ADERR
.100 CENTER KK CONNECTORS
PRODUCT SPECIFICATION
CHECKED BY:
JBELL
of kinked
Discontinuity < 1 microsecond
Discontinuity < 1 microsecond
Number
2.94 N (300 grams) average
MINIMUM withdrawal force
MINIMUM withdrawal force
MAXIMUM insertion force
MAXIMUM insertion force
pins
10 milliohms MAXIMUM
10 milliohms MAXIMUM
10 milliohms MAXIMUM
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC
(change from initial]) &
2
4
6
(change from initial) &
22 awg = 44 N (10 lbf)
24 awg = 35 N (8 lbf)
26 awg = 26 N (6 lbf)
28 awg = 17 N (4 lbf)
30 awg = 13 N (3 lbf)
(change from initial)
1.95 N (0.438 lbf)
0.56 N (0.125 lbf)
REQUIREMENT
17.8 N (4.0 lbf)
6.67 N (1.5 lbf)
Maximum
Insertion
(per pin)
(9.9 lbf)
(4.8 lbf)
(4.1 lbf)
44.0 N
21.4 N
18.2 N
force
&
APPROVED BY:
Average
Insertion
(per pin)
(3.4 lbf)
(2.2 lbf)
(1.1 lbf)
15.1N
9.8 N
4.9 N
force
FSMITH
SHEET No.
3
of
5