NSYPFPLM SCHNEIDER, NSYPFPLM Datasheet - Page 2

• Manufacturer Part Number: NSYPFPLM
• Description: BRACKET, WALL MOUNTING, PK4
• Manufacturer: SCHNEIDER

Specifications of NSYPFPLM

• Accessory Type: Mounting Bracket
• For Use With: CRN, CRS Series Enclosures
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Thalassa PLM
General characteristics of the
Thalassa PLM wall-mounting
enclosures:
– Smooth.
– Transparent (for the ABS/PC enclosure) or glazed
Properties of the material of the
polyester versions
The wall-mounting enclosures are made from
polyester reinforced with fibreglass, moulded by hot
compression, RAL 7032 colour.
This material:
Characteristics of the production
process of the polyester version
The components of the enclosure (body and doors)
are moulded by hot compression: the parts have an
excellent finish on both sides and can include bosses
for accommodating inserts and accessories for
mounting or cable-management.
(for the polyester enclosures).
Indoor or outdoor use.
1 size for the ABS/PC wall-mounting enclosure
(310
7 sizes of polyester wall-mounting enclosures.
Monobloc body including the canopies (seal
protection), except for wall-mounting enclosure
ref. NSYPLM3025.
Doors with polyurethane seal.
2 types of doors.
Reversible door opening direction by turning the
enclosure over.
Degree of protection IP 66 according to standard IEC
60529.
Impact resistance IK 10 for the plain doors
and surfaces and IK 08 for the glazed doors of
the polyester versions, according to standard
IEC 62262.
Many accessories in common with the range of steel
wall-mounting enclosures, Spacial S3D or Spacial
CRN.
Is insulating: several kV per mm.
Withstands cold and heat in the range of
–50 ºC...+150 ºC.
Does not soften under intense heat (ball resistance
at +150 ºC).
Is self-extinguishing (does not propagate fire):
HB40 classification and self-extinguishing in several
seconds during the glow-wire test at 960 ºC –30 sec.
Does not contain halogens.
Releases little smoke and no toxic smoke in the
event of combustion.
Is light.
Can be machined easily.
Is corrosion-resistant: no rusting, and can withstand
many chemical agents.
Can resist bad weather.
215
160 mm).
Certificate of conformity with
enclosure standard IEC 62208 for:
IP, IK, resistance to heat and fire, insulation 5000 V,
resistance to bad weather and corrosion and
resistance to internal loads (150 kg/m
the door (30 kg/m
UL certification and NEMA
classification 4x and 13 for
the polyester wall-mounting
enclosures
Full insulation to produce class II
units according to IEC 61439- 1
Complies with the RoHS directive
2
).
2
) and loads on
6/17