PCV-480BY Panduit Corp, PCV-480BY Datasheet - Page 105

• Manufacturer Part Number: PCV-480BY
• Description: Voltage Marker, Vinyl, 480 VOLTS, 4.50
• Manufacturer: Panduit Corp
• Series: PAN-CODE™r
• Type: Wire Marker, Cardsr

Specifications of PCV-480BY

• Size: 4.50" W x 1.13" L (114.0mm x 29.0mm)
• Cable Diameter: 1.25" ~ 3.00" (31.7mm ~ 76.2mm)
• Legend: 480 Volts
• Color: Orange
• Width: 1.13 in
• Product: Voltage and Fiber Optic Markers
• Features: Adhesive marker cards are made of durable indoor vinyl material
• Length: 4.5 in
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: PCV-480B; PCV-480B

1910.147(f)(3)(ii)(A)
Primary responsibility is vested in an authorized employee for a set number
of employees working under the protection of a group lockout or tagout
device (such as an operations lock);
1910.147(f)(3)(ii)(B)
Provision for the authorized employee to ascertain the exposure status of
individual group members with regard to the lockout or tagout of the machine
or equipment and
1910.147(f)(3)(ii)(C)
When more than one crew, craft, department, etc. is involved, assignment of
overall job-associated lockout or tagout control responsibility to an
authorized employee designated to coordinate affected work forces and
ensure continuity of protection; and
..1910.147(f)(3)(ii)(D)
1910.147(f)(3)(ii)(D)
Each authorized employee shall affix a personal lockout or tagout device to
the group lockout device, group lockbox, or comparable mechanism when he
or she begins work, and shall remove those devices when he or she stops
working on the machine or equipment being serviced or maintained.
1910.147(f)(4)
Shift or personnel changes. Specific procedures shall be utilized during
shift or personnel changes to ensure the continuity of lockout or tagout
protection, including provision for the orderly transfer of lockout or tagout
device protection between off-going and oncoming employees, to minimize
exposure to hazards from the unexpected energization or start-up of the
machine or equipment, or the release of stored energy.
Note: The following appendix to §1910.147 services as a non-mandatory
guideline to assist employers and employees in complying with the
requirements of this section, as well as to provide other helpful information.
Nothing in the appendix adds to or detracts from any of the requirements
of this section.
For service and technical support, call 800-777-3300 or visit www.panduit.com.
OSHA 1910.333
Safety-related work practices shall be employed to prevent electric shock
or other injuries resulting from either direct or indirect electrical contacts,
when work is performed near or on equipment or circuits which are
or may be energized.
H13