ID60DT TELEX COMMUNICATIONS, ID60DT Datasheet
![Drivers For Public Address Horns](/photos/23/28/232876/4579358_sml.jpg)
ID60DT
Manufacturer Part Number
ID60DT
Description
Drivers For Public Address Horns
Manufacturer
TELEX COMMUNICATIONS
Datasheet
1.ID60DT.pdf
(2 pages)
Specifications of ID60DT
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
General Product Description
The ID60D-8 and ID60DT are heavy-duty compression
drivers for use in high-power public address installations.
The drivers employ rugged phenolic diaphragms, 2-inch
diameter voice coils and “rim centered” ferrite magnet
structures for long life and reliability under extreme operating
conditions.
A hinged cycolac rear housing for easy access and
connection to a sound system, via a BX conduit connector,
is provided together with a plug-in, field replaceable
diaphragm assembly.
The transformer model (ID60DT) includes connections for
25-V and 70-V distributed systems and a screwdriver
operated power-tap select switch.
The exterior is finished in durable, weatherproof paint, and
all metal parts have been tropicalized for resistance to high
humidity and fungus.
Ideal for both indoor and outdoor applications, these drivers
are well suited for any installation requiring rugged,
high-power performance.
Architects’ and Engineers’ Specifications
The loudspeaker(s) shall be of the compression-driver type
utilizing a rugged phenolic diaphragm and a
high-temperature rated, 2-in. diameter voice coil.
The loudspeaker(s) shall exhibit essentially flat power
response from 300 to 4,000 Hz with a smoothly rolled-off
response beyond. Their sensitivity, when mounted on a PH
horn, will be 108 dB (1 W/1 m) with a 500- to 5,000-Hz
pink-noise signal applied.
Specifications:
Frequency Response:
Power Handling, 8 Hours, 6-dB Crest Factor:
Impedance, Nominal: ...................................................... 8 ohms
Sound Pressure Level at 1 Meter, 1 Watt Input Averaged, Pink
Noise Band-Limited from 300-3,000 Hz:
Voice Coil Diameter: .......................................... 5.08 cm (2.0 in.)
Magnet Weight: ................................................... 0.48 kg (1.06 lb)
Magnet Material: ................................................ Strontium ferrite
Flux Density: ............................................................... 1.17 Tesla
Construction:
............................................. 300 - 4,000 Hz ±5 dB (see Figure 2)
............................................... 60 watts (500-5,000 Hz pink noise)
..................................................................................... See Table I
Rugged diecast housing with weatherproof finish for outdoor
use
Minimum:7.5 ohms (Cobraflex Horns above 500 Hz)
The loudspeaker(s) shall be capable of handling a 60-watt,
500- to 5,000-Hz pink-noise signal with a 6-dB crest factor
for a period of 8 hours.
The loudspeaker(s) shall have a diameter of 14.3 cm (5.6
in.) and a depth of 16.2 cm (6.4 in.) They shall have a 2.41
cm (0.95 in.) throat opening with a 1 3/8-18 thread for
mounting.
The loudspeaker shall be the ID60DT, which includes a 70-V/
25-V line-matching transformer and weighs no more than 3
4 kg (7.4 lb), and the ID60D-8, which has a nominal
impedance of 8 ohms and weighs no more than 2.7 kg (5.9
lb).
Mechanical Construction of Driver:
Dimensions:
Net Weight:
Shipping Weight:
Recommended Horns:
1 3/8"-18 thread, 1/2 long allows the ID60 to be mounted on
any University Sound horn.
Diameter: ..................................................... 14.3 cm (5.6 in.)
Height: .......................................................... 16.2 cm (6.4 in.)
Cobreflex IIB, Cobreflex III, PH, 2WP, SMH, SH
Compression Drivers
ID60D-8: .................................................. 2.7 kg (5.9 lb)
ID60DT: .................................................. 3.4 kg (7.4 lb)
D60D-8:: .................................................. 2.9 kg (6.3 lb)
ID60DT: .................................................. 3.6 kg (7.9 lb)
Heavy-Duty
COMMERCIAL
Related parts for ID60DT
ID60DT Summary of contents
Page 1
... They shall have a 2.41 cm (0.95 in.) throat opening with a 1 3/8-18 thread for mounting. The loudspeaker shall be the ID60DT, which includes a 70-V/ 25-V line-matching transformer and weighs no more than (7.4 lb), and the ID60D-8, which has a nominal impedance of 8 ohms and weighs no more than 2.7 kg (5.9 lb) ...
Page 2
... Alternately, a 1/2-inch conduit fitting can be substituted for the gland nut. However, the sealing washer must be retained. For the ID60DT, connect the loudspeaker wires to the “com” terminal and the appropriate line terminal ( V). For the ID60D-8, connect to the “com” and “8-ohm” terminals. ...