LMR1-173-5 RADIOMETRIX, LMR1-173-5 Datasheet - Page 8

• Manufacturer Part Number: LMR1-173-5
• Description: RECEIVER, 173.20-173.325MHZ
• Manufacturer: RADIOMETRIX

Specifications of LMR1-173-5

• Rohs Compliant: YES

RX Received Signal Strength Indicator (RSSI)
The LMR1 has wide range RSSI that measures the strength of an incoming signal over a range of 60dB or
more. This allows assessment of link quality and available margin and is useful when performing range tests.
The output on pin 5b of the module has a standing DC bias of up to 0.5V with no signal, rising to 2.5V at
maximum indication (RF input levels of -40dBm and above). Vmin-max is typically 2V and is largely
independent of standing bias variations. Output impedance is 40k . Pin 5b can drive a 100 A meter directly,
for simple monitoring.
Figure 6: typical RSSI level with respect to received RF level at LMR1 antenna pin
Antenna requirements
Three types of integral antenna are recommended and approved for use with the module:
A) Whip
B) Helical
C) Loop
Radiometrix Ltd
Ultimate performance
Easy of design set-up
Size
Immunity proximity effects
2.6
2.4
2.2
1.8
1.6
1.4
1.2
0.8
0.6
0.4
0.2
2
1
0
-140 -130 -120 -110 -100 -90
This is a wire, rod ,PCB track or combination connected directly to RF pin of the module.
Optimum total length is 410mm (1/4 wave @ 173MHz). Keep the open circuit (hot) end well
away from metal components to prevent serious de-tuning. Whips are ground plane
sensitive and will benefit from internal 1/4 wave earthed radial(s) if the product is small and
plastic cased
Wire coil, connected directly to RF pin, open circuit at other end. This antenna is very
efficient given it’s small size (20mm x 4mm dia.). The helical is a high Q antenna, trim the
wire length or expand the coil for optimum results. The helical de-tunes badly with proximity
to other conductive objects.
A loop of PCB track tuned by a fixed or variable capacitor to ground at the 'hot' end and fed
from RF pin at a point 20% from the ground end. Loops have high immunity to proximity de-
tuning.
RF level (dBm)
LMT1/LMR1 Data Sheet
***
***
*
*
whip
A
-80
-70
helical
**
**
***
**
B
-60
-50
*
*
**
***
loop
C
-40
page 8