DSOX3012A AGILENT TECHNOLOGIES, DSOX3012A Datasheet - Page 19
![OSCILLOSCOPE, 2 ANLG, 100MHZ, 4GSPS](/photos/23/50/235024/4728447_sml.jpg)
DSOX3012A
Manufacturer Part Number
DSOX3012A
Description
OSCILLOSCOPE, 2 ANLG, 100MHZ, 4GSPS
Manufacturer
AGILENT TECHNOLOGIES
Datasheet
1.DSOX3AUDIO.pdf
(26 pages)
Specifications of DSOX3012A
Scope Type
Digital Bench
Scope Channels
2 Analog
Bandwidth
100MHz
Meter Display Type
WVGA Color
Sampling Rate
4GSPS
Input Impedance
1Mohm
Rise Time
3.5ns
Input Voltage
300V
Lead Free Status / RoHS Status
na
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
Performance characteristics
* Denotes warranted specifications, all others are typical.
Horizontal system digital channels
Characteristics
Maximum sample rate
Maximum record length
Minimum detectable pulse width
Channel-to-channel skew
Trigger system
Characteristics
Trigger modes
Trigger coupling
Trigger holdoff range
Trigger level range
Specifications are valid after a 30-minute warm-up period and ±10 °C from firmware calibration temperature.
Trigger sensitivity
Internal*
External*
Any channel
External
All MSO models and DSO models with MSO upgrade
1 GSa/s
2 Mpts (digital only), 500 kpts (analog and digital channels)
5 ns
2 ns (typical); 3 ns (maximum)
All 3000 X-Series models
• Normal (triggered): requires trigger event for scope to trigger
• Auto: triggers automatically in absence of trigger event
• Single: triggers only once on a trigger event, press [Single] again for scope to find another
• Force: front panel button that forces a trigger
DC: DC coupled trigger
AC: AC coupled trigger, cutoff frequency: < 10 Hz (internal); <50 Hz (external)
HF Reject: High frequency reject, cutoff frequency ~ 50 kHz
LF Reject: Low frequency reject, cutoff frequency ~ 50 kHz
Noise Reject: Selectable OFF or ON, decreases sensitivity 2x
40 ns to 10.00 s
<10 mV/div: greater of 1 div or 5 mV; ≥ 10 mV/div: 0.6 div
200 mVpp from DC to 100 MHz
350 mVpp 100 MHz to 200 MHz
± 6 div from center screen
± 8 V
trigger event, or press [Run] to trigger continuously in either Auto or Normal mode
19