3640 KIT-300FT AEMC, 3640 KIT-300FT Datasheet - Page 2

• Manufacturer Part Number: 3640 KIT-300FT
• Description: GROUND RESISTANCE TESTER KIT, 2000OHM
• Manufacturer: AEMC

Specifications of 3640 KIT-300FT

• Resistance Measuring Range: 20/200/2000 Ohm
• Resolution (ohm): 1ohm
• Test Current: 10mA
• Accuracy: 2% Of Rdg ± 3cts
• External Height: 136mm
• External Width: 220mm
• External Depth: 150mm
• Weight: 2.9lb
• Lead Free Status / RoHS Status: na

Features
•
•
•
•
•
•
blue), two 100 ft color-coded leads (green and black),
one 30 ft lead (green), four 14.5" T-shaped auxiliary
Fall-of-Potential method
Measures ground resistance
(2- and 3-Point)
Auto-Ranging: automatically selects
the optimum range
Designed to reject high levels of
noise and interference
Extremely simple to operate:
connect – press – read
LED on faceplate informs operator of
high input noise, high auxiliary rod
resistance and fault connections
Ground Kits
two 500 ft color-coded leads on spools (red and
ground electrodes, one set of five spaded lugs,
Test Kit for 4-Point testing includes instrument,
100 ft tape measurer and carrying bag.
one set of five spaded lugs, 100 ft tape measurer
two 14.5" T-shaped auxiliary ground electrodes,
Test Kit for 3-Point testing includes instrument,
Technical Assistance [phone]
two 150 ft color-coded leads on spools
(red and blue), one 30 ft lead (green),
Catalog #2135.15
Catalog #2135.13
and carrying bag.
•
•
•
•
•
•
Battery powered
Rugged dustproof and rainproof
field case
Color-coded terminals
May also be used for continuity
tests on bonding
Double Insulation
CE Mark
Test Kit for 4-Point testing includes instrument,
two 300 ft color-coded leads on spools (red and
blue), two 100 ft color-coded leads (green and
black), four 14.5" T-shaped auxiliary ground
electrodes, one set of five spaded lugs,
100 ft tape measurer and carrying bag.
Catalog #2135.14
Applications
•
•
Three-point measurements for
measuring resistance to ground of
ground rods and grids. Three-point
measurements are generally used
when the electrode or grid is easily
disconnected, if corrosion is
suspected, or where ground faults
are unlikely to occur.
Two-point tests for continuity tests
on bonding or on pre-established
grounds. This test is commonly
performed in urban environments
where proper auxiliary electrode
placement may be obscured by
confined real estate. Measurements
are referenced against a good local
ground conductor.
Model 3640 (pdf)
www.aemc.com
Rev. 04
2 of 5
05/06