8648C AGILENT TECHNOLOGIES, 8648C Datasheet - Page 28

• Manufacturer Part Number: 8648C
• Description: SIGNAL GENERATOR FREQUENCY/PULSE, 3.2GHZ
• Manufacturer: AGILENT TECHNOLOGIES

Specifications of 8648C

• Signal Generator Type: Signal
• Bandwidth: 3.2GHz
• Modulation Type: AM, FM, Phase
• Supply Voltage Range: 90V To 264V
• External Height: 165mm
• External Width: 330mm
• External Depth: 368mm
• Lead Free Status / RoHS Status: na

28
1. ESG series does not implement 8657A/B “Standby” or “On” (R0 or R1, respectively) mnemonics.
General characteristics
Power requirements
Operating
temperature range
Storage
temperature range
Shock and vibration
Leakage:
461C CE02 Part 2 and CISPR 11. Leakage is typically < 1 µV
(nominally 0.1 µV with a 2-turn loop) at 1000 MHz, measured
with a resonant dipole antenna, one inch from any surface with
output level < 0 dBm (all inputs/outputs properly terminated).
Storage registers:
user data files, sweep list files and waveform sequences.
Depending on the number and size of these files, up to 800
storage registers and 10 register sequences are available.
Weight
Dimensions
Remote programming
Interface GPIB (IEEE-488.2-1987) with listen and talk. RS-232.
Control languages SCPI version 1992.0, also compatible
with 8656B and 8657A/B/C/D/J
Functions controlled All front panel functions except power
switch and knob.
IEEE-488 functions SH1, AH1, T6, TE0, L4, LE0, SR1, RL1,
PP0, DC1, DT0, C0, E2.
ISO compliant
The ESG series RF signal generators are manufactured in
an ISO-9001 registered facility in concurrence with Agilent’s
commitment to quality.
Accessories
Transit case
Remote interface
Conducted and radiated interference meets MIL-STD-
Memory is shared by instrument states,
< 13.5 kg (28 lb.) net, < 19.5 kg (42 lb.)
shipping
133 mm H x 426 mm W x 432 mm D
(5.25 in H x 16.8 in W x 17 in D)
Part number 9211-1296
83300A
1
mnemonics.
90 to 254 V; 50, 60, or 400 Hz;
200 W maximum
0 to 55 °C
–40 to 71 °C
Meets MIL-STD-28800E Type
III, Class 3.
Inputs and outputs
All front panel connectors can be moved to rear with Option 1EM.
RF output
Nominal output impedance 50 ohms. (type-N female, front panel)
LF output
Outputs the internally-generated LF source.
Outputs 0 to 3 Vpeak into 50 ohms, or 0 to 5 V
impedance. (BNC, front panel)
External input 1
Drives either AM, FM, M, or burst envelope. Nominal input
impedance 50 ohms, damage levels are 5 V
(BNC, front panel)
External input 2
Drives either AM, FM, M, or pulse. Nominal input impedance 50
ohms, damage levels are 5 V
Auxiliary interface
Used with 83300A remote keypad sequencer (9-pin RS-232
connector female, rear panel)
10 MHz input
Accepts a 10 MHz ±10 ppm (standard timebase) or ±1 ppm
(high-stability timebase) reference signal for operation with an
external timebase. Nominal input impedance 50 ohms. (BNC,
rear panel)
10 MHz output
Outputs the 10 MHz internal reference level nominally +7 dBm ±2
dB. Nominal output impedance 50 ohms. (BNC, rear panel)
GPIB
Allows communication with compatible devices. (rear panel)
Sweep output
Generates output voltage, 0 to +10 V when signal generator is
sweeping. Output impedance < 1 ohm, can drive 2000 ohms.
(BNC, rear panel)
Trigger output
Outputs a TTL signal: high at start of dwell, or when waiting for
point trigger in manual sweep mode; low when dwell is over or
point trigger is received, high or low 4 µs pulse at start of LF sweep.
(BNC, rear panel)
Trigger input
Accepts TTL signal for triggering point-to-point in manual sweep
mode, or to trigger start of LF sweep. Damage levels +10 V or
With ESG-AP and ESG-A series and
Option 1E6 only
Pulse input
Drives pulse modulation. Input impedance TTL. (BNC, front or
rear panel)
With ESG-DP and ESG-D series only
“I” input
Accepts an “I” input either for I/Q modulation or for wideband AM.
Nominal input impedance 50 ohms, damage levels are 1 V
V
“Q” input
Accepts a “Q” input for I/Q modulation. Nominal input impedance
50 ohms, damage levels are 1 V
peak
–4 V. (BNC, rear panel)
. (BNC, front panel)
rms
rms
and 10 V
and 10 V
peak
rms
peak
. (BNC, front panel)
and 10 V
. (BNC, front panel)
peak
into high
peak
rms
.
and 10