19493 Desco, 19493 Datasheet
![no-image](/images/manufacturer_photos/0/1/190/desco_sml.jpg)
19493
Manufacturer Part Number
19493
Description
FIELD METER ION TESTER
Manufacturer
Desco
Specifications of 19493
Kit Contents
Static Field Meter, Conductive Plate, Charger, 2x Alkaline Batteries, Data Cord, Carrying Case
Rohs Compliant
NA
Lead Free Status / Rohs Status
RoHS Compliant part
“Air ionizers Compliance Verification ESD SP3.3, Periodic Verification of Air Ionizers. Objective,
The objective of this periodic test procedure is to verify that the discharge time and offset
voltage (ion balance) of air ionizers is in compliance with the user's specification.
Measurements should be made at the location where ESD sensitive items are to be ionized.”
(ESD TR53 Compliance Verification of ESD Protective Equipment and Materials)
TB-3041
Technical Documents
Features And Benefits
Manufacturer of ESD Static Control Products
- Ionization Test Kit
Portable Kit for Testing of Electrostatic Fields, and Offset Voltage and
Discharge Times of Air Ionizers
Measures surface voltage and polarity on objects up to ±19.99 kV at a distance of 1
inch.
Stainless Steel Conductive Plate for Static Field Meter
Used to measure offset voltage and discharge times for the periodic verification of
ionizers per ANSI/ESD SP3.3 and ESD TR53.
±1000 Volt Charger
Apply charge to conductive plate to measure discharge times.
Durable Housing Design with Membrane Switches
Protects meter from physical damage and minimizes wear.
LED Range Finder
Red ranging lights help operator to place the meter at the correct distance from the
object being measured
Hold Button
Allows the measurements to be retained for easy reading
NIST Calibrated with Certificate
Calibrated with accepted procedures and standards traceable to the National Institute
of Standards and Technology. For more information on calibration of Desco products,
see
Made in America
This item is made and stocked in
Estimated Shipping Weight: 2.05 Pounds
The Ionization Test Kit isolates the conductive Plate and positions it 1” away from the
end of the Digital Static Field Meter. The battery operated Charger then allows one
to quickly place a +/-1,000 volt charge on the Plate which since it is isolated will
remain there for some time. The Periodic Verification of Air Ionizers test in
accordance with ESD-SP3.3 is to place the Kit in the Ionizer’s airflow and use a
stopwatch to measure the discharge times to reduce a 1,000 volt charge to 100 volts
and to reduce a -1,000 volt charge to -100 volts. With the Kit grounded, it can then
approximate offset voltage (balance).
Calibration
19493 - KIT, COMPLETE, FIELD METER/ION TEST
Chino, CA
Copyright © 2010 Desco Industries, Inc. All rights reserved.
(NEW)