SPAN50ESD-P BOFA, SPAN50ESD-P Datasheet - Page 14
![ARM AND NOZZLE, PLASTIC, 50MM](/photos/30/37/303701/42259929_sml.jpg)
SPAN50ESD-P
Manufacturer Part Number
SPAN50ESD-P
Description
ARM AND NOZZLE, PLASTIC, 50MM
Manufacturer
BOFA
Datasheet
1.SPAN50ESD-P.pdf
(16 pages)
Specifications of SPAN50ESD-P
Svhc
No SVHC (18-Jun-2010)
Rohs Compliant
NA
Lead Free Status / RoHS Status
na
14
The ADVANTAGE VL Laser Fume Extraction and Purification System has been
designed to be used in conjunction with the ULS Versa 200 and 300 lasers.
The system comes with a compressor option to supply the Versa laser with its
compressed air requirements.
The new ADVANTAGE 500 has not only been designed for efficiency and quiet
extraction, but also as a workstation. When the engraver is mounted on top
of the unit it creates the perfect operation height. It can also be fitted with a
compressor for most laser manufacturers requirements.
The unique 2 stage pre-filter design offers over 12m² of filter surface area,
keeping the cost of ownership for these units to a minimum.
24v Stop/Start
Allows the extractor to start and stop in
sequence with laser .
Requires 18-32 volt signal AC or DC.
VOC Indicator
Alerts you when Volatile Organic Compounds
are getting through the gas filter.
Carcass
Manufactured in powdered coated mild steel.
Standard Equipment
2 year warranty
Integral silencer
Unit and filter monitoring system
Corrosion resistant carcass
Standard filter set (see below)
Unit VL: 75mm inlet
Unit 500: 75/100mm inlet
Weight 80kgs
Electrics
230v 50/60hz or 110v 50/60hz
3 metres hard wired power cable
Illuminated ON/OFF switch
Unit VL Full Load Current: 0.9 amps (1.1)
Unit 500 Full Load Current: 7.2 amps (14)
Blower/Pump
30,000 hours life
Unit VL:
Unit 500:
Brushless Motor
Standard Filter Set
2 Stage pre filter
95% efficiency at 0.8 micron
12m² of surface area
Combined Filter
99.997% efficiency at 0.3 micron
Activated carbon mix
System Failure Signal
Signals laser in the event of a failure
within the extractor.
Filter Change Signal
Signals laser when filters need replacing.
Automatic Flow Control
Allows user to set required airflow. The
unit will then maintain this airflow even
as filters start to block.
Output
0.35kw
1.1kw
Airflow
200m³
400m³