WS02-SGWC1 Omron, WS02-SGWC1 Datasheet - Page 2

• Manufacturer Part Number: WS02-SGWC1
• Description: SYSMAC Gateway (FINS GW) 1 Lic
• Manufacturer: Omron

Specifications of WS02-SGWC1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

2
OMRON’s Upgraded FA Communications
Flexible, High-speed, and Direct Data Link
Computers.
Flexible, High-speed Software for Direct PLC Access
Upgraded Functions for FA Communications Software
Item
Operating system
Network
PLCs
Other functions
In response to this demand, OMRON has completely renovated its FA Commu-
nications Software under new names. Data links are now possible using Ether-
net. Data links can even be accessed via a LAN port on a notebook computer.
And FA Communications Software can be used to access PLC data by using
only tag names to enable more flexible and higher-speed access of PLC data
from personal computers, and that lowers costs by eliminating the need for a
special board for data links.
The need for faster transmission of more and more information between personal computers and
PLCs is coupled with the need for frequent changes to specifications, such as address allocations
in PLCs, a demand for software standardization to eliminate dependence on specific applications
and networks, and a demand for cost reductions.
SYSMAC PLC
RS-232C
SYSMAC Gateway
FINS/CIP Communications Middleware
CX-Compolet
(formerly SYSMAC Compolet)
EtherNet/IP
USB
System Applications
SYSMAC PLC
USB
FA Communications Software
SYSMAC Gateway
Windows Vista
Yes (Tag access and data links enabled.)
Yes (CJ2, CP1)
CJ2 (with EtherNet/IP functionality)
Checking operation on EtherNet/IP
SYSMAC PLC
EtherNet/IP
Device-embedded Applications
Easy PLC Data Reading
and Writing with VB.NET
and VC#.NET Control
Objects
SYSMAC PLC
(formerly FinsGateway)
Ethernet
SYSMAC PLC
Controller Link
CX-Compolet
Visual Studio.NET 2008
• Array variables are supported.
CX-Compolet software
enables easily reading and
writing PLC data using Visual
Basic.NET and Visual
C#.NET. It is the successor to
SYSMAC Compolet.
SYSMAC Gateway
SYSMAC Gateway can be
used as the communications
driver on most networks. It is
the successor to FinsGate-
way and has inherited all
FinsGateway functionality.
CX-Compolet
Product Positioning
Software Lets You Create Applications with
Access to SYSMAC PLCs from Personal
FROM
Tag Access
Application data can be accessed using tag names
rather than addresses.
Tag
name
PLC data was accessed
using addresses, so if an
address was changed in the
PLC it also had to be
changed in the application.
Name server
Two types of
access are
supported.
Flexibility
−Tag Access
−Two Types of Access
As-needed
access to
PLCs on
networks
Access to
collected data
in personal
computers
Data
High-speed
access
Easy
Simultaneous Upgrade for All OMRON FA Communications Software
CJ2
With EtherNet/IP functionality
No changes are required at the application.
The addresses in PLC assigned to tag
names can be changed without creating
additional work.
Tag access
You can easily handle changes to
specifications.
NEW
CX-Compolet, etc.
TO
PLC data is accessed using
tag names, so there is no
need to change addresses in
the application even if
addresses are changed in the
PLC. This enables application
standardization.
Application
No special
Board required.
Tag access
Personal computer
Two New Features
−Access to personal computers
−Communicate using software
NEW
via data links.
processing.
High Speed
Flexibility
You can easily handle
changes to specifications.
Virtual PLC
memory
Reduced costs and greater communications capacity.
EtherNet/IP
Same name
server as for CJ2
FROM
Data links are possible between personal computers
and PLCs on Ethernet networks.
Data Links
Personal computers become nodes on EtherNet/IP data links just like PLCs.
A PCI Controller Link Support
Board was required to
establish data links.
There were strict limitations on
the capacity and speed of
Controller Link data links.
Data links
SYSMAC CJ2
∗1
EtherNet/IP is required for data links on Ethernet networks.
NEW
PLC data can be read and written across
EtherNet/IP networks by simply reading and
writing values in personal computer memory.
Direct Data Link Access
−Special Boards, such as
Controller Link and SYSMAC
LINK Support Boards, are not
required.
High-speed, large-capacity data links are possible.
TO
∗1
− The LAN port at the personal
− Software operations are used,
EtherNet/IP provides greater capacity
and higher speed, and because data
link areas in personal computer
memory are accessed, data access is
faster than having to constantly
access EtherNet/IP nodes.
computer is used, so no special
board is required. Data links are
possible even for a notebook
computer.
improving personal computer and
communications performance.
SYSMAC CJ2
3