40982 Desco, 40982 Datasheet
![Statfree DPL Plus Diamond Plate Floor Runner](/photos/24/3/240321/4120184_sml.jpg)
40982
Manufacturer Part Number
40982
Description
Statfree DPL Plus Diamond Plate Floor Runner
Manufacturer
Desco
Datasheet
1.40980.pdf
(2 pages)
Specifications of 40982
Length
60ft
External Width
36"
Thickness
0.45"
Body Material
Vinyl & Foam Rubber
Roll Length
60ft
Features
Exceeds ANSI/ESD S20.20 Required Limit 10E9 Ohms For ANSI/ESD Floor
Color
Black W/Highly Visible Yellow Border
External Height
0.45"
Rohs Compliant
NA
Lead Free Status / RoHS Status
na
© 2009 DESCO INDUSTRIES INC.
Employee Owned
Description:
Anti-fatigue conductive floor mat;
homogeneous vinyl laminated to a unique
super-resilient, double-thick, rubber foam
base. This conductive diamond plate surface
offers a high-tech look while providing
traction. The diamond plate surface and
tapered edges are adopted from industrial
safety applications; it is a proven safety
and anti-fatigue product. The yellow safety
border provides high visibility and can alert
employees to ESD controlled areas.
Statfree DPL Plus™ meets the technical
range recommended in ANSI/ESD S20.20
for ESD Floor < 1 x 10E9 ohms tested
per ANSI/ESD S7.1. Being a conductive
floor mat, Statfree DPL Plus™ is suitable
as the ESD floor component in a Flooring
- Footwear System, ANSI/ESD S20.20
recommended technical requirement of <3.5
x 10E7ohms tested per ESD STM 97.1.
See reverse side for item numbers and descriptions.
Side View
Specifications:
Construction:
Thickness:
Radius:
Surface:
Hardness:
Heat Resistance:
Weight:
Density:
Grounding
This material must be properly grounded to remove electrostatic charges to ground. Ask for Technical
Bulletin
Grounding Intervals for ESD Mats
Sufficient ground cords should be used to reliably meet ANSI/ESD S20.20 Table 1 less than 1 x 10E9
ohms for worksurfaces. An industry recommendation has been that continuous runs of ESD matting
should be grounded at ten-foot intervals to allow proper charge decay rates with each individual ESD
mat should be grounded with ground snap located no further than five feet from either end.
Cleaning
For optimum electrical performance, surface must be cleaned regularly using an ESD mat cleaner.
We suggest using our Reztore™ Surface & Mat Cleaner Item
Do not use cleaners with silicone. Silicone buildup will create an insulative film on the surface.
Electrical Properties:
Property
Charge Decay:
RTT Resistance:
RTG Resistance:
Electrical Properties obtained by testing to industrial standards by an independent testing laboratory
@ 100 Volts and 50% relative humidity unless otherwise specified. Complete text of the test report is
available upon request.
TB-2000
for mat grounding instructions.
STATFREE DPL PLUS™ FLOOR MAT, VINYL, CONDUCTIVE, ANTI-FATIGUE
DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE:
PHONE (909) 627-8178 FAX (909) 627-7449
DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407
PHONE (781) 821-8370 FAX (781) 575-0172
Homogenous vinyl laminated to dual-layer foam rubber
0.450” (11.4mm)
1”
Embossed Diamond Plate Design
90 Shore A
0°F to 150°F continuous
1.45 lbs. per square foot
Average: 33 lbs. per cubic foot
Test Method
FTMS 101C, Method 4046
ANSI/ESD S7.1
ANSI/ESD S7.1
Desco.com
#10435
Value
5,000 volts-0 volts in 0.03 seconds
10E3 - 10E5 ohms
10E3 - 10E5 ohms
or Static Wipes Item #10600.
DRAWING NUMBER
PM-125
Made in America
November
DATE:
2009
40982 Summary of contents
Page 1
... Volts and 50% relative humidity unless otherwise specified. Complete text of the test report is available upon request. STATFREE DPL PLUS™ FLOOR MAT, VINYL, CONDUCTIVE, ANTI-FATIGUE DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: PHONE (909) 627-8178 FAX (909) 627-7449 DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407 ...
Page 2
... Floor Mat 36” x 48” 0.450” 40981 Floor Mat 36” x 60” 0.450” 40982 Floor Runner 36” x 60’ 0.450” Mats include our complete Floor Ground Kit Item #14234. Rolls do not include hardware. Tolerances: ” Width ± .250 Length ± ...