40983 Desco, 40983 Datasheet
40983
Manufacturer Part Number
40983
Description
Statfree DPL Plus Diamond Plate Floor Runner
Manufacturer
Desco
Datasheet
1.40983.pdf
(2 pages)
Specifications of 40983
Length
75"
External Width
36"
Thickness
0.225"
Body Material
Vinyl & Foam Rubber
Roll Length
75"
Features
Exceeds ANSI/ESD S20.20 Required Limit 10E9 Ohms For ANSI/ESD Floor
Color
Black W/Highly Visible Yellow Border
External Height
0.225"
Rohs Compliant
NA
Lead Free Status / RoHS Status
na
© 2007 DESCO INDUSTRIES INC.
Employee Owned
Description:
The 40983 Statfree DPL Plus™ floor runner
is a conductive, homogeneous vinyl. Its
diamond plate surface offers a high-tech
look while providing traction. The diamond
plate surface is adopted from industrial
safety applications and is a proven safety
product. The yellow safety border provides
high visibility and can alert employees to
ESD controlled areas.
Statfree DPL Plus™ meets the technical
range recommended in ANSI/ESD S20.20
for ESD Floor < 1 x 10E9 ohms tested per
ANSI/ESD S7.1. Being a conductive floor
mat, Statfree DPL Plus™ is suitable as the
ESD floor component in a Flooring -
Footwear System, ANSI/ESD S20.20
recommended technical requirement of <3.5
x 10E7ohms tested per ESD STM 97.1.
See reverse side for item numbers and descriptions.
Side View
Specifications:
Construction:
Thickness:
Surface:
Hardness:
Heat Resistance:
Grounding
This material must be properly grounded to remove electrostatic charges to ground. Ask for Technical
Bulletin TB-2000 for mat grounding instructions.
Grounding Intervals for ESD Mats
Sufficient ground cords should be used to reliably meet ANSI/ESD S20.20 Table 1 less than 1 x 10E9
ohms for worksurfaces. An industry recommendation has been that continuous runs of ESD matting
should be grounded at ten-foot intervals to allow proper charge decay rates with each individual ESD
mat should be grounded with ground snap located no further than five feet from either end.
Cleaning
For optimum electrical performance, surface must be cleaned regularly using an ESD mat cleaner.
We suggest using our Reztore™ Surface & Mat Cleaner Item #10435 or Static Wipes Item #10600.
Do not use cleaners with silicone. Silicone buildup will create an insulative film on the surface.
Electrical Properties:
Property
Charge Decay:
RTT Resistance:
RTG Resistance:
Electrical Properties obtained by testing to industrial standards by an independent testing laboratory
@ 100 Volts and 50% relative humidity unless otherwise specified. Complete text of the test report is
available upon request.
STATFREE DPL PLUS™ FLOOR RUNNER, VINYL, CONDUCTIVE
DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com
PHONE (909) 627-8178 FAX (909) 627-7449
DESCO EAST: 90 HUDSON RD, CANTON, MA 02021-1407
PHONE (781) 821-8370 FAX (781) 575-0172
Homogenous vinyl
0.225" (5.7mm)
Embossed Diamond Plate Design
90 Shore A
0°F to 150°F continuous
Test Method
FTMS 101C, Method 4046
ANSI/ESD S7.1
ANSI/ESD S7.1
Value
5,000 volts-0 volts in 0.03 seconds
10E3 - 10E5 ohms
10E3 - 10E5 ohms
DRAWING NUMBER
PM-126
Made in America
February
DATE:
2007
40983 Summary of contents
Page 1
... Side View See reverse side for item numbers and descriptions. Description: The 40983 Statfree DPL Plus™ floor runner is a conductive, homogeneous vinyl. Its diamond plate surface offers a high-tech look while providing traction. The diamond plate surface is adopted from industrial safety applications and is a proven safety product ...
Page 2
... Damage to matting caused by misuse of any kind, including using inappropriate cleaners is not covered by Desco Limited Warranty. © 2007 DESCO INDUSTRIES INC. Employee Owned Item No. Size Thickness 40983 Floor Runner 36" x 75' 0.225" Tolerances: Width ± .250 " Length ± .250" every 1 linear foot of running material. ...