8890 3M, 8890 Datasheet - Page 48

• Manufacturer Part Number: 8890
• Description: Static Dissipative Rubber Table Runner
• Manufacturer: 3M

Specifications of 8890

• Ground Terminals: Stud
• External Width: 4ft
• Thickness: 1.7mm
• Roll Length: 40ft
• Color: Gray
• Lead Free Status / RoHS Status: na

3M
Dissipative Hard Laminate Sheets are used where a hard, durable,
electrically safe surface is needed, providing a low coefficient of
friction to permit heavy objects to slide easily. Controlled conductivity
(surface-to-ground) virtually eliminates shock hazard when working
on a powered component.
This material is post-formable with normal high pressure laminate
process techniques used by furniture makers. Using this technique,
a tight 0.5 in. (12.7 mm) radius is possible, which allows installation
without seams in corners and over rounded edges when forming parallel
to sanding lines. The laminate provides a comfortable rounded front on
which personnel can rest their arms. It is resistant to common solvents
and to hot solder droppings.
3M
Static Dissipative Rigid Worksurface 8300 Series have the high abrasion
resistance of a laminate, yet are as easy to install as table mats. The
nonglare surface also resists staining, scorching and common solvents.
All edges and corners are rounded, and the laminate comes ready to
use with two factory-installed snap fasteners, and one 3M
System 3048 for wrist strap/table mat.
3M
Note: For consistent static charge dissipation from rigid,
conductive flat-bottomed totes and trays, use of a pad or mat
of 3M Dissipative Vinyl Material 8200 in conjunction with this
static-protective hard laminate is suggested, especially in areas
where relative humidity often drops below 30%.
3M
™
™
Dissipative Hard Laminate Sheets
Rigid Worksurface 8300 Surface
™
™
Dissipative Hard Laminate Sheets
Dissipative Rigid Worksurfaces
™
Grounding
Workstation Products
Wrist Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 2
Monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 12
Static Control Surface Mark Remover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 44
Dissipative Rubber Mats/Rolls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 37
Static Control Surface Mark Remover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 44
Static Control Floor Tile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg. 112
Non-standard sizes and colors are also available, subject to minimum order quantity.
* Tested per ESD Association Standard 4.1 at 72oF, 50% RH using 3M Test Kit 701 for Static
Properties
Property
Thickness
Hardness
Abrasion resistance:
*Resistance
Product No.
Control Surfaces (Megohmmeter)
Product No.
8360
8365
8375
8343
8344
8353
8354
(Surface to Ground)
(Surface to Surface)
Color
Beige
Gray
Beige
Gray
Color
Beige
Gray
White
Typical Value
0.037 in. (0.94 mm)
> 1500 cycles Tabor Wheel 32
7 x 10
6 x 10
Size, in.
0.125 x 24 x 36
0.125 x 24 x 36
0.125 x 24 x 36
0.125 x 24 x 36
6
7
Size, ft.
4 x 8
3 x 12
5 x 12
4 x 8
3 x 12
5 x 12
5 x 12
ohm
ohm
(cm)
(0.32 x 61.0 x 91.0)
(0.32 x 61.0 x 91.0)
(0.32 x 61.0 x 91.0)
(0.32 x 61.0 x 91.0)
(m)
(1.2 x 2.4)
(0.9 x 3.7)
(1.5 x 3.7)
(1.2 x 2.4)
(0.9 x 3.7)
(1.5 x 3.7)
(1.5 x 3.7)
43