8891 3M, 8891 Datasheet - Page 62

• Manufacturer Part Number: 8891
• Description: Static Dissipative Rubber Table Runner
• Manufacturer: 3M

Specifications of 8891

• Ground Terminals: Stud
• External Width: 4ft
• Thickness: 1.7mm
• Roll Length: 40ft
• Color: Blue
• Lead Free Status / RoHS Status: na

3M
Image
™
Accessories Selection Guide
No Photo
Available
Product No.
3033
3034
3037
3038
3040
3041
3042
3043
CTA242
CTA243
CTA245
FGC150M
FGC151M
WSGR2
Description
Snap Fastener, male, 0.125 in. (3.2 mm) hole, 10 mm diameter. For mats and runners. 1800/8800 Series.
Snap Fastener, female, 0.125 in. (3.2 mm) hole, 10 mm diameter. For 3M
1800/8800 series.
Insulated Bulldog Clip. Fits standard banana plug.
Uninsulated Alligator Clip. Fits standard banana plug.
Ground Cord, 15 ft. (4.6 m), with 10 mm snap. Molded-in male snap fastener with integral
1 megohm resistor on one end, solderless terminal on other. Connects all 3M
and Runners to building ground.
Grounding Kit for 3M
lock washer wing nut, #10 self-tapping screw and one 10 ft. (3.0 m) ground cord. Ground cord has
a 1 megohm resistor.
Wrist Strap Grounding System. Grounds two single conductor wrist straps and conveniently
mounts beneath the edge of most work benches. Comes complete with 10 ft. (3.0 m) ground cord.
Interconnect Cord 5 ft. (3.5 m), with 10 mm snap. Molded-in male snap fastener at each end.
Connects all static control mats and runners to each other. Ground cord has a 1 megohm resistor.
This remote terminal connects to WS Aware workstation monitors and provides connection for
dual wire wrist straps for an operator and a visitor. Patented plug-in replaceable board with the
jacks reduces cost of ownership of the monitor since only one inexpensive board needs to be
replaced when the jacks are worn out, instead of the entire terminal.
Before sensitive devices are handled, Big Brother alarms alert the operator to plug-in. Once Big Brother
senses that the operator is properly grounded the alarm is silenced. The Big Brother wrist strap terminal
makes the WS Aware one of the most intelligent and cost-effective systems on the market today.
Replacement board with jacks for WS Aware remote monitors CTA242 and CTA243.
The low profile beveled cap prevents the cord from being accidentally removed from the mat.
A 3/8 in. (10 mm) stud securely snaps to the mat, and at the other end of the 15 ft. (4.5 m) cord
is a ring terminal.
This metal grounding block accommodates two wrist straps and comes complete with mounting
hardware. Designed to be mounted under the bench and keep the wrist strap connections safe.
The integral 15 ft. (4.5 m) cord ends with a ring terminal. Two 4 mm parking studs hold coiled
cords to reduce damage to cords left at the bench. No resistor.
Workstation Products
™
Static Protective Hard Laminate includes #10 screw, lock washer, #10 nut,
™
Mats and Runners
™
Static Control Mats
57