91-6422E-AC-01 THE SIMCO COMPANY, 91-6422E-AC-01 Datasheet - Page 2

• Manufacturer Part Number: 91-6422E-AC-01
• Description: BENCHTOP IONIZER
• Manufacturer: THE SIMCO COMPANY

Specifications of 91-6422E-AC-01

• Ionizer Type: Hand Held
• Flow Rate Max: 23CFM
• Depth: 63mm
• Width: 83mm
• Height: 111mm
• Supply Voltage Vac: 24V
• Mounting Type: Bracket

1 Tested in accordance with ANSI/ESD STM3.1-2006.
Input Voltage
Output Voltage
Indicators
Ion Emission
Emitter Points
Airflow
Discharge
Balance
Ozone
Mounting
Operating Temp
Humidity
Dimensions
Weight
Warranty
Certifications
Transformer 14-1320
Input Voltage
Output
Dimensions
Certifications
Transformer 14-1330
Input Voltage
Output
Dimensions
Certifications
AC Adapter 14-1322
Input Voltage
Output
Dimensions
Certifications
Specifications
24 VDC (±10%), 6W max. or 24 VAC (±10%), 50-60 Hz, 6W max.
5-6 kV at emitter points
Green power LED and red alarm LED
Steady-state DC
Tungsten wire; internally shielded
23 CFM, typical
±1000-100V, <4 sec @ 1 foot
±20V at 1 foot away
<0.004 ppm, typical (24-hour accumulation)
U-bracket, factory installed
50-95°F (10-35°C)
20-60% RH, non-condensing
With bracket: 4.95H x 4.10W x 2.48D in. (125H x 104W x 63D mm);
without bracket: 4.36H x 3.26W x 2.48D in. (111H x 83W x 63D mm)
With bracket 12.7 oz (357g); without bracket 11.2 oz (314g)
Two year warranty
RoHS Compliant
120 VAC ±10%, 50-60 Hz
24 VAC, 60 Hz @ 450 mA, ±5%
2.4H x 2.2W x 1.6D in. (61 x 56 x 41 mm)
RoHS Compliant
230 VAC ±10%, 50 Hz
24 VAC @ 750 mA, ±5%
2.8H x 2.5W x 1.9D in. (71H x 64W x 48D mm)
RoHS Compliant
120-240 VAC ±10%, 50/60 Hz
24 VDC @ 400 mA
1.4H x 2.1W x 3.4L in. (36H x 53W x 86L mm)
RoHS Compliant
1
with either 24 VAC or 24 VDC
Enhanced Capabilities
An alarm LED on the front of the blower indicates a high
voltage circuitry failure and a five-pin facility monitoring
system (FmS) interface is accessible on the rear of the
blower. The FmS interface provides a 4-20 mA current
loop and relay output connection. Together with the 24
VDc input connection, the FmS output is situated on a
convenient terminal block, designed for easy integration
with your process equipment.
Power Options
The model 6422e blower may be powered by 24 VAc or
24 VDc, from power supplies or directly from process
equipment to fit your application. For 100-120 VAc input
power, use #14-1320, for 230 VAc use #14-1330, and for
applications where Dc input power is preferred, use #14-
1322 (performance may be reduced with Dc power).
Auto-Clean System
The Auto-clean System
that sweeps the emitter points when the blower is
turned off and on. During operation of the fan, the brush
automatically retracts to reduce wear. ION Systems
recommends activating the Auto-clean System at least
once a week. cleaning schedules will vary depending on
environmental conditions.
_____________
ION Systems patented Auto-Clean System significantly reduces the need for manual cleaning
Ordering Inf ormation
DS-6422_V5 - 06/10
© 2010 ION Systems
All rights reserved.
91-6422e
91-6422e-AC
14-1320
14-1330
14-1322
Ionizing blower with alarm indicator light and FMS
Ionizing blower with Auto-Clean
24 VAC 450 mA transformer
24 VAC 750 mA transformer
24 VDC 500 mA AC-DC adapter
1
features a brush mechanism
ION Systems
1750 North Loop Road
Alameda, cA 94502
Tel:
Tel:
[e-mail]
www.ion.com
Specifications are subject to change without notice.
800.367.2452 (in USA)
510.217.0600