16425 Desco, 16425 Datasheet

CHAIR COVER, DISSIPATIVE

16425

Manufacturer Part Number
16425
Description
CHAIR COVER, DISSIPATIVE
Manufacturer
Desco
Datasheet
1.16425.pdf (1 pages)

Specifications of 16425

Rohs Compliant
NA
© 2010 DESCO INDUSTRIES INC.
Employee Owned
Product marked with ESD protective symbol to identify used for ESD control
“Fabric upholstered chairs accomplish this by using conductive fibers woven
into the fabric. The fabric is then connected through the components of the
chair, through the cylinder, base and casters (or drag chain) to the floor.”
[ESD Handbook TR20.20 Seating section 5.3.5.2 Types and Selection]
Chair not included
If not otherwise noted, tolerance ±10%
Specifications and procedures subject to change without notice
Statshield
ESD SYSTEMS.COM
432 NORTHBORO ROAD CENTRAL
MARLBORO, MA 01752 USA
TEL. (508) 485-7390 FAX (508) 480-0257
Description:
ESD Systems
into ESD chairs when used on ESD flooring. The drag chain must connect the chair back and seat
covers and make reliable contact with ESD flooring to remove electrostatic charges to ground. Using
the same fabric as ESD smocks, the cover’s conductive fibers attenuate electrostatic fields shielding
ESD sensitive items. It’s one size fits standard sized chairs and covers both seat and chair backs. In
addition to shielding, the Statshield Chair Cover is low charging antistatic, and dissipative.
Specifications:
Grounding resistance:
Chain Length:
Fabric Weight:
Fabric Content:
Fabric Color:
Carbon Mono-filament:
Surface Resistance of Fabric:
Static Decay Rate:
Size
Laundering Instructions:
If need be, this cover can be laundered. Use cool or warm water. Maximum temperature 120 °F. Do
not use bleach, tumble dry on cool.
Installation Instructions:
Attach top part of cover to chair back and bottom part of cover (with grounding chain attached) to
chair seat. Make sure cover is fitted, centered, and secured to chair. Secure the ground chain to
center post underneath chair with hook and loop and make sure ground chain makes contact with
ESD floor. Suggest a chain minimum length of 6 inches making contact along the floor.
Seat:
Back:
®
16425
Dissipative Chair Cover
Statshield Chair Cover with Drag Chain is designed to convert regular chairs
18" x 20", maximum diameter 19" nominal
15 1/2" x 18 1/2", maximum diameter 17" nominal
1 megohm hermetically sealed resistor
24" long chain with resistor in series
5 oz per square yard
80% polyester, 19% cotton, and 1% BASF
carbon suffused mono-filament nylon
Royal Blue
Conductive at 10E4 ohms, non-flaking and
non-sloughing
10E5 - 10E8 ohms tested per ESD TR53 Seating test
based on ANSl/ESD STM12.1, Seating - Resistive
Measurement
5000 volts to 500 volts in less than 0.01
seconds, per FTMS-101C
DRAWING NUMBER
TD-16425
Made in America
August
DATE
2010