J726B VERMASON, J726B Datasheet

no-image

J726B

Manufacturer Part Number
J726B
Description
ANTISTATIC ENGINEER'S KIT
Manufacturer
VERMASON
Type
Field Service Kitr
Datasheet
1.J726B.pdf (1 pages)

Specifications of J726B

Kit Contents
See Technical Datasheet
Svhc
No SVHC (18-Jun-2010)
Approval Bodies
EN100 015-01
Colour
Blue
Surface Resistivity Max
10Mohm/sq
Lead Free Status / RoHS Status
na
Purpose of Field Service Kit
To create a temporary ESD Protected Area (EPA). An EPA is a working space where electrostatic discharge
sensitive devices (ESDS) may be unpacked, handled and packed with the minimum risk of being damaged
by static electricity.
Contents of kit
•
•
•
•
•
•
•
Instructions for use
•
•
•
•
•
•
•
•
General Instructions
•
•
•
•
General
•
Service mat, Code J727R or J727B. Size when open 590x545mm
Straight ground cord, Code J6455
Crocodile clip, Code J5118
Wrist band, Code JA48Y
Coiled cord, Code J4221Y
Pouch, Code J728B
Total weight of kit: 0.4kg
Remove kit from pouch
Open mat and place on a flat stable surface with the stud facing upwards.
Connect straight ground cord using snap fastener to the stud on the mat.
Connect 4 mm plug of the straight ground cord to Earth or to an earthed terminal of the equipment.
If necessary use the crocodile clip to do so.
Put on wrist band. Ensure wrist band fits snugly. Separate instructions for use are supplied with
band.
Connect coiled cord by snap fastener to wrist band.
Plug the other end of coiled cord into straight cord. Alternatively, the coiled cord can be connected
to Earth or the equipment Earth terminal, possibly using the crocodile clip.
The EPA is now ready for use.
Always replace kit in pouch after use.
Do not clean mat with solvents. Use Vermason bench top cleaner or mild detergent and warm
water.
Pouches sewn into mat are suitable for holding components, PCBs and ESD compatible tools.
If possible test the overall resistance to Earth of the personnel regularly. This can be effected by
preparing the kit for use and measuring the resistance from the operator's finger tips to Earth. The
resistance should be approximately 3 MΩ, but certainly be at least 0.75 but less than 35 MΩ.
The surface resistivity of both sides of the mat is approximately 10
Page 1 of 1
Vermason Limited, Birds Hill, Letchworth, Hertfordshire SG6 1HX UK
Please direct all inquiries to Technical Services & Development
STATIC DISSIPATIVE SERVICE KIT
on fax: +44 (0) 1462 670440 or e-mail: tsnd@vermason.co.uk
Code J726*B (blue) or J726*R (red)
Product Information
Issue No 6
FEC Code 877682
www.vermason.co.uk
No: PIS 037
Date: July 2003
8
Ω per square.
Approved by