OPAKIT-100 OPTEK TECHNOLOGY, OPAKIT-100 Datasheet - Page 12

• Manufacturer Part Number: OPAKIT-100
• Description: LED Development KIT
• Manufacturer: OPTEK TECHNOLOGY

Specifications of OPAKIT-100

• Tool / Board Applications: High Brightness LEDs
• Development Tool Type: Hardware / Software - Dev Kit (Dev Tool)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

mçïÉê=pçìêÅÉë=
IRC Advanced Film Division — www.irctt.com
OPTEK Technology, Inc. — www.optekinc.com
Welwyn Components Limited — www.welwyn-tt.com
Part Number
LD1400
LD350
LD700
TT electronics subsidiaries reserves the right to make changes at any time in order to improve design and to supply the best product possible.
LD1400
120 VAC 60 Hz
120 VAC 60 Hz
120 VAC 60 Hz
Input Voltage
15 Watts Max
17 Watts Max
51 Watts Max
Input Power
Method to operate the drivers.
1. Connect the VLED assembly to the driver before applying power to the
driver. If there is no load on the driver when it is powered, there will be 30 volts
on the output. If you then connect the 30 volts to an assembly, it could over-
stress the assembly.
2. Remove power from the driver before removing the LED assembly. If the
VLED assembly is removed from the driver first, there will be 30 volts on the
driver when you connect the next VLED assembly. The charge may remain on
the output for a long time.
If the driver has been powered with no load on the output, the best method for
removing the 30V charge is to connect the driver to the OPA730 ring VLED
assembly. The more VLEDs in series, the less likely the no-load voltage
charge will damage the assembly.
+ Voltage (Red)
Output Current
1400 mA
350 mA
700 mA
Output Voltage
2.6 to 32.6 VDC
7.8 to 24.6 VDC
7.8 to 24.6 VDC
Ground (Black)
LD350 & LD700
Dot Color
Green
Blue
Red
Issue A
Page A23
10/05