EB051C MATRIX, EB051C Datasheet - Page 4

• Manufacturer Part Number: EB051C
• Description: Microcontroller Development Tools
• Manufacturer: MATRIX

Specifications of EB051C

• Silicon Manufacturer: Matrix
• Application Sub Type: ZigBee
• Kit Application Type: Communication & Networking
• Features: Zigbee Wireless Communications, Flowcode Macros Available, Status LED
• Kit Contents: Daughter Card
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

4. 3.3V system compatibility
5. Communications
6. V2 XBEE Module
The board is compatible with 3.3V and 5V systems.
The XBEE modules are configured by means of using a TTL level RS232 bus to send and receive AT commands.
This protocol requires a start bit, eight data bits and a stop bit.
The baud rate for the XBEE modules is set to 9600, with no parity and flow control lines RTS and CTS that can be
used. AT commands are strings of ASCII data that are sent over the RS232 bus. For more information on the AT
commands used by the XBEE module please refer to the V2 XBEE datasheet.
Example AT command
ATID 234 - Assigns a personal area network identifier of 0x234 or 564 in decimal.
For further data regarding the XBEE module please visit the following link.
www.matrixmultimedia.com/datasheets/XBEEV2.pdf
Copyright © Matrix Multimedia Limited 2008
E-blocks™ Zigbee board
Document code: EB051-30-1
page 4