LPC1768-SK EMBEST, LPC1768-SK Datasheet - Page 3

• Manufacturer Part Number: LPC1768-SK
• Description: NXP LPC1768 Starter Kit
• Manufacturer: EMBEST

Specifications of LPC1768-SK

• Silicon Manufacturer: NXP
• Core Architecture: ARM
• Core Sub-architecture: Cortex-M3
• Features: USB 2.0 Full Speed Interface, Analog Voltage Control For ADC Input
• Silicon Core Number: LPC17xx
• Silicon Family Name: LPC17xx

(2) A PC with the following resources:
(3) One USB-JTAG Emulator.
(4) Two USB cables.
(5) One double Female Serial Cable
1.3 Software Requirements
To use the LPC1768 starter kit, we recommend you to install the following software tools:
(1) Windows Operating System
The Keil µVision tool chain runs in these Windows Operating Systems:
(2) Tools and Examples
To compile, link, and run applications on the LPC1768 Evaluation Board, please install the
following products on your pc:
1.4 Power Supply
1.5 Connection
LPC1768 ARM Cortex-M3 board supports two power supply modes; you can select one of
these two power supply modes below through JP12 configuration.
(1) Supply 5V DC through power jack (JP11) on the board.
(2) Supply power through USB connecter (CON1) on the board, the current should be less
than 500mA
To use the LPC1768 Starter Kit, you must:
Two unused USB ports—one is for power supply r of the board and the other for
connecting to the JTAG Emulator to download and debug programs.
An unused RS-232 COM port for Flash In-System Programming (ISP) via the Serial
Interface.
Microsoft Windows 2000
Microsoft Windows XP
Keil RealView MDK IDE
The Keil RealView MDK IDE is a commercial software tool, if you don't have this IDE ion
your PC, you can purchase the authorized edition from Keil Corporation, or download
the evaluation version of RealView MDK (32KB limited) for free of charge. Of course, you
can use other IDE as well, such as IAR EWARM, but we suggest you using Keil RealView
MDK IDE, then you can use the example projects provided in the CD-ROM of the kit.
Example projects written for the LPC1768 Starter Kit. These example programs are
stored in the CD-ROM accompanied with the kit.
Connect the JTAG connector of Emlink for ARM to the JTAG connector of the LPC1768
ARM Cortex-M3 board.
Connect the USB connector of Emlink for ARM to the USB connector of the PC.
Connect power to the board using a standard USB A/B cable.
www.embedinfo.com/en
3/3