DATAMAN-848PRO DATAMAN, DATAMAN-848PRO Datasheet - Page 2

• Manufacturer Part Number: DATAMAN-848PRO
• Description: 848Pro Stand-Alone Production Programmer
• Manufacturer: DATAMAN

Specifications of DATAMAN-848PRO

• Ic Product Type: Programmer, Universal
• Ic Interface Type: USB
• No. Of Devices Supported: 33000
• Features: Stand-Alone Operation With Touch Screen Control
• Kit Contents: 848Pro+ Programmer, Diagnostic PODs, Cables, User Manual And Software

Base Unit (DAC)
• USB 2.0 high-speed compatible port, up to 480 Mbit/s transfer rate
• On-board intelligence: powerful microprocessor and FPGA based state machine
• Three D/A converters for VCCP, VPP1, and VPP2, controllable rise and fall time
• VCCP range 0..8V/1A
• VPP1, VPP2 range 0..26V/1A
• Selftest capability
ZIF Socket Pindriver
• 48-pin DIL ZIF socket accepts both 300/600 mil devices up to 48-pin
• Pindrivers: 8 x 48 universal
• VCCP/VPP1/VPP2 can be connected to each pin
• Perfect ground for each pin
• FPGA based TTL driver provides H, L, CLK, pull-up, pull-down on all pindriver pins
• Analog pindriver output level selectable from 1.8 V up to 26V
• Current limitation, overcurrent shutdown, power failure shutdown
• ESD protection on each pin of socket (IEC1000-4-2: 15kV air, 8kV contact)
• Continuity test: each pin is tested before every programming operation
ISP Connector
• 20-pin male type with missinsertion lock
• 6 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level H selectable
• 1x VCCP voltage (range 2V..7V/100mA), can be applied to two pins
• Programmed chip voltage (VCCP) with both source/sink capability and
• 1x VPP voltage (range 2V..25V/50mA), can be applied to six pins
• Target system supply voltage (range 2V..6V/250mA)
• ESD protection on each pin of ISP connector (IEC1000-4-2: 15kV air, 8kV
Software:
User Interface
There are two ways to control and monitor the programming flow of the 848Pro
stand-alone multiprogrammer: using the control unit or using a standard
display, keyboard and mouse.
• The graphical control unit with touch screen provides essential information
• Using a display, keyboard and mouse allows access to all programming flow
Production Mode Control
• This part of the software is focused to the easy monitoring of high-volume
• Operator-friendly control software combines many powerful functions with
• Project files are used to control the 848Pro and contain user data, chip
• Each chip may be programmed with different data such as serial number,
IN THE UK…
Dataman Programmers Ltd.
Station Road, Maiden Newton
Dorset DT2 0AE, UK
Tel [phone]
Fax [phone]
from 1.8V up to 5V to handle all (including low-voltage) devices
voltage sense
contact)
about the programming flow and allows basic control of the 848Pro
programmer.
information and options.
production operations.
ease of use. Graphic user interface provides an overview of important
information, reducing the burden on the operator with unnecessary details.
programming setup, chip configuration, auto programming command
sequence, etc. This helps minimize operator error as the project file is normally
created and proofed by engineer and passed to the operator. The optional
protected mode can be set avoiding unwanted changes to the project file.
configuration and calibration information.
IN THE US…
Dataman Inc.
215 East Michigan Avenue
Orange City, Florida 32763 USA
Tel [phone]
Fax [phone]
Engineering Mode Control
• This part of the software is focused to the quick and easy preparation of the
• Each programming module is driven by an easy-to-use control program with
• Standard device-related commands (read, blank check, program, verify, erase)
• All known data formats are supported. Automatic file format detection and
• The versatile auto-increment function allows each programmed device to be
• The software provides extensive information about programmable devices
The Dataman 848Pro supports over 33,000 of the most popular devices in use
today - with future devices being added monthly. Dataman 848Pro coverage
includes the following device types:
Programmer (ZIF Socket)
EPROM, EEPROM, Flash EPROM, Serial E(E)PROM, Configuration (EE)PROM,
1-Wire E(E)PROM, PROM, NV RAM, PLD, Microcontrollers
Programmer (ISP Connector)
Serial E(E)PROM, Microcontrollers, PLD
Package Includes:
• Dataman 848Pro Stand-Alone Production Programmer
• Diagnostic POD for ZIF socket selftest of the programmer (x1)
• Diagnostic POD for ISP connector selftest of the programmer (x1)
• ISP cable (x8)
• Anti-dust cover for ZIF socket (x8)
• ESD wrist strap with cord and banana plug
• User manual
• Software
• Transport case
• Optional range of adapters and socket converters also available
Warranty and Support:
• 30 day money back guarantee* - If you don't like it, send it back
• Three year guarantee - Three years parts and labour warranty, on the 848Pro
• Life-Time Technical Support - 848Pro technical support is available free via
• Life-Time Software Updates - 848Pro software updates are available free via
*Applies to orders from UK/US office only
project file for usage in the production mode control software.
pull-down menus, hot keys and on-line help. Selecting of device is performed
by its class, by manufacturer or simply by typing a fragment of vendor name
and/or part number.
are enhanced by test functions (insertion test, connection check, signature-
byte check) and additional special functions (autoincrement, production
mode).
conversion during loading of file. Jam file (JEDEC standard JESD-71) and VME
file compatible.
assigned an individual or incrementing serial number. This function also
enables the operator to read serial numbers or device identification
signatures from a file.
including detailed drawings of all available packages and provides
explanations of chip labelling (prefixes and suffixes).
Processor: Intel Core 2 Duo 1.8 GHz
Memory: 1024 MB
Hard drive: 160 GB
Operating system: Microsoft Windows XP
Dimensions: 625x465x115 mm (24.6x18.3x4.5 inches)
Weight: 14.9kg (32.85 lb)
Operating voltage: 100-240V AC
Power consumption: max. 300W active
stand-alone gang programmer.
our website and telephone helpdesk for life
our website for life
Available from…
www.dataman.com