CPMC-88-2 MCM, CPMC-88-2 Datasheet - Page 249
CPMC-88-2
Manufacturer Part Number
CPMC-88-2
Description
RF/Coaxial Connector
Manufacturer
MCM
Datasheet
1.133-3711-801.pdf
(294 pages)
Specifications of CPMC-88-2
Connector Type
BNC Coaxial
- Current page: 249 of 294
- Download datasheet (10Mb)
BNC Straight Crimp Type Bulkhead Jacks
for Flexible Cable
CP-79-20BM1
CP-79-20BM2
CP-89-19BM1
CP-89-27BM2
PART NO.
Connectivity Solutions
RG-174, 316
RG-178, 196
RG-179
RG-179
CABLE
.315 (8.00)
.315 (8.00)
.315 (8.00)
.226 (5.75)
Tel: 800-247-8256
“A”
STRIP DIMENSIONS
.197 (5.00)
.157 (4.00)
.197 (5.00)
.106 (2.70)
“B”
•
Fax: 507-833-6287
.138 (3.50)
.118 (3.00)
.138 (3.50)
.118 (3.00)
“C”
SLEEVE HEX
.184 (4.67)
.184 (4.67)
.184 (4.67)
.128 (3.25)
CRIMP
Assembly Instructions
1. Identify connector parts. (3 piece parts)
2. Strip cable to dimensions shown. Do not nick braid or
3. Assemble contact onto cable as shown.
4. Flare braid and slide body assembly over contact and
•
center conductor. Tin center conductor if contact will be
solder attached. Do not tin center conductor if contact is
to be crimp attached. A wire stripper of correct size is
recommended for this step. Slide heat shrink (as appli-
cable) and crimp sleeve onto jacket of cable.
Solder Attachment: Solder contact to center conductor
through hole using a minimum amount of solder for a good
joint.
Crimp Attachment (where applicable): Crimp contact
to center conductor using recommended crimp hex.
under braid. Then seat body assembly firmly onto con-
tact. The cable may have to be held in a clamping fixture.
Arrange braid uniformly around crimp stem. Slide crimp
sleeve forward and crimp using recommended crimp hex.
Slide heat shrink forward and shrink (as applicable).
www.EmersonNetworkPower.com/connectivity
None (solder
CRIMP HEX
CONTACT
.066 (1.69)
.066 (1.69)
.066 (1.69)
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
Only)
RECOMMENDED
CRIMP TOOL
24-9912P
24-9912P
24-9912P
94-9963P
249
Related parts for CPMC-88-2
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
IN WALL SPEAKER VOLUME CONTROL70V DECORA WHITE 35W
Manufacturer:
MCM
Part Number:
Description:
HD-15 To DB-9 Female Adaptor, Contact Plating: Gold, Features: D Gender Changers For IBM Type Computers Or Monitors, Completely Shielded
Manufacturer:
MCM
Part Number:
Description:
DC PANEL MOUNT JACK EIAJ 3.3X5.5X1.0 PLASTIC (EIAJ IV)
Manufacturer:
MCM
Part Number:
Description:
IC MCU 8051 OTP 64K 5V 64VQFP
Manufacturer:
Atmel
Datasheet:
Part Number:
Description:
Transistor Reference Software, Compiled So The User Can Substitute Transistors That Perform The Same, Despite Their Different Part Numbers. Crosses Are Made According To Maximum Ratings And Electrical Characteristics, Approximately
Manufacturer:
MCM
Part Number:
Description:
Microwave Oven Triac, PB Package Series, Triac Thyristor
Manufacturer:
MCM
Part Number:
Description:
NTE Thermal Circuit Breakers, Current Rating: 5 A, Resistance: .03 Ohm, Mounting Type: Snap-in, Contact Termination: .25 Quick Connect Terminal, Features: Fuse Holder Type, Visual Trip Indicator, Push To Reset, UL And CSA Listed
Manufacturer:
MCM