5738 Pomona Electronics, 5738 Datasheet - Page 78

• Manufacturer Part Number: 5738
• Description: RF/COAXIAL ADAPTER, N JACK-COUPLING NUT
• Manufacturer: Pomona Electronics

Specifications of 5738

• Connector Type: Inter Series Coaxial
• Body Style: Straight Adapter
• Convert From Connector: N Coaxial
• Convert From Gender: Jack
• Convert To Connector: N Coaxial
• Contact Material: Phosphor Bronze
• Accessory Type: Female Connector
• Equipment Type: Test Connectors, Probes and Testleads
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: 501-1034 Universal Adapter Kit (Model 5698)
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 5738PO

78
Active Differential Probe
Pomona Model 6731 differential voltage probe allows users to
safely make floating high voltage measurements while using gen-
eral purpose oscilloscopes. Using a built-in differential amplifier,
the floating signal is converted and scaled to a low-voltage signal
referenced to earth ground. The probe can be used on circuits
associated with electronic high-power converters, motor speed
controls, switching mode power supplies, and other high voltage
circuits requiring isolation.
Features include switchable attenuation, high impedance to ground
for both positive and negative side of the balanced input, and
maximum differential voltage up to 1000V. The probe input uses
shrouded banana test probe tip. The output to the oscilloscope is
made with a BNC cable with a safety insulated BNC male connector.
www.pomonaelectronics.com
Included with the 6731:
Large Jaw Alligator clips
(one red and one black).
Pin-Grabber Test Clips
(one red and one black).
9V Alkaline Battery.
Optional:
Model 6732: Universal
Power Adapter.
Oscilloscope Probes and Accessories
Input Characteristics
Input Probe
Input Cable Length
Probe Ratio
Voltage to Ground
Maximum Input
Maximum Differential
Input Voltage
Maximum Floating
Voltage / Frequency
Probe Input Resistance
Probe Input
Capacitance
Operating Temperature
Output Characteristics
Output Cable
Output Cable Length
Output Voltage Range
Accuracy
Bandwidth
Risetime
CMRR
Power
9V Alkaline Battery
Model 6732 Optional
Universal Power
Adapter
Shrouded banana test probe
60in (1.5m)
20:1 / 200:1
600V CAT III, 1000V CAT II
1000 Vdc
1000 Vrms
1200V (DC + Peak AC)
600V Category III /400 Hz
(from shielding to ground)
5MΩ (input to shielding), 10MΩ (input to input)
6 pF (input to shielding), 5 pF (input to input)
+32 to +122°F (0 to +50°C)
BNC cable
20in (0.5mm)
±6.5V (into 1MW)
±2.5%
DC to 20 MHz (-3 dB)
17.5 ns
20:1 @ 60Hz =>70dB
20:1 @ 1MHz =>40 dB
8 hours operation. 400 hours in standby. Unit goes into
standby mode after 30 minutes (battery mode only).
For continuous operation
200:1 @ 60Hz => 80dB
200:1 @ 1 MHz =>50dB