050/30P/LA/KP2 SILVER OXLEY, 050/30P/LA/KP2 SILVER Datasheet - Page 38

• Manufacturer Part Number: 050/30P/LA/KP2 SILVER
• Description: TERMINAL, KINKY PIN, PCB
• Manufacturer: OXLEY
• Series: KINKY PINr

Specifications of 050/30P/LA/KP2 SILVER

• Contact Material: Copper Alloy
• Current Rating: 7A
• Contact Plating: Silver
• Connector Colour: Natural
• Svhc: No SVHC (15-Dec-2010)
• Colour: Contact Material
• Contact Resistance: 5mohm
• Operating Temperature Max: 125°C
• Rohs Compliant: Yes
• Connector Type: Test Point
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

38
Assembly Tools
Assembly Procedure - Plugs
Assembly Procedure
- Sockets
BARB CONE LOCK
Plugs and Sockets
Oxley Developments Company Ltd
Email:[e-mail]
Tel: [phone]
®
Oxley Inc.
Email:
Tel: [phone]
[e-mail]
1. Thread the connecting wire through the insulating sleeve.
2. Solder the wire into the hole on the probe.
3. Assemble the sleeve and probe with the appropriate insertion tools or by
1. Ensure the holes are within tolerance and deburred.
2. Place the bush into the hole.Support the chassis underneath throughout
3. Using the appropriate assembly tool, slowly press the socket tube into
Oxley Barb Cone Lock self locking plugs and sockets are designed to take
advantage of the outstanding electrical and physical properties of high
dispersion grade PTFE (polytetrafluorethylene).
The socket contact is slit longitudinally to exploit the inherent elastic of the
surrounding PTFE, thus providing the necessary retention and low contact
resistance even after repeated insertions.
The chassis mounted connectors are assembled by first inserting the PTFE
bush into the mounting hole and then slowly, but firmly, inserting the contact
spill through the bush until a positive action firmly locks the assembly in
place.
The flying connector is assembled by first threading the PTFE sleeve on to
the connecting wire, then soldering the wire in the solder bucket, before
pressing home the sleeve onto the spill.
Component
Type Number
0.55P/2
0.55S/2
2P/6
2S/6
4P/8
4S/8
30P/093
30S/093
30S/093/V
30S/093/VL
30LS/093
40P/156
40FP/156
40LS/156
40S/156
40S/156/V
40-/-
hand.
this operation.
the bush until it is just below the top surface of the bush. Support the
chassis underneath throughout this operation.
Tool Number
AT 1/23
AT 2/15
AT 1/22 & ATS 3/16
AT 2/14
N/A
AT 2/13
AT 1/21 & ATS 3/08
AT 2/12
N/A
N/A
AT 2/12 & ATS 3/08
AT 1/17 & ATS 3/05
AT 1/17
AT 2/08 & ATS 3/05
AT 2/11
N/A
AT 2/11
Oxley Group Australia Pty Ltd
Email:
Tel [phone]
[e-mail]
Component
Type Number
50P/156
50P/156/S
50FP/156
50LS/156
50S/156
50S/156/V
50-/-
60P/156
60FP/156
60LS/156
60S/156
60S/156/V
60-/-
100P/250
100FP/250
100LS/250
100S/250
www.oxleygroup.com/interconnect
ODCSM:40566/4/2006
Tool Number
AT 1/18 & ATS 3/05
AT 1/18
AT 1/18
AT 2/07 & ATS 3/05
AT 2/10
N/A
AT 2/10
AT 1/19 & ATS 3/05
AT 1/19
AT 2/06 & ATS 3/05
AT 2/09
N/A
AT 2/09
AT 1/20 & ATS 3/16
AT 1/20
AT 2/04 & ATS 3/16
AT 2/05