2222 338 60472 Vishay, 2222 338 60472 Datasheet - Page 12
2222 338 60472
Manufacturer Part Number
2222 338 60472
Description
CAPACITOR, Y2 4.7NF 300V CAPACITOR, Y2 4.7NF 300V
Manufacturer
Vishay
Series
2222338r
Datasheet
1.2222_338_60103.pdf
(20 pages)
Specifications of 2222 338 60472
Capacitance
4.7NF
Voltage Rating, Ac
300V
Voltage Rating, Dc
1000V
Capacitor Dielectric Type
POLYPROPYLENE
Tolerance,
20%
Tolerance, -
20%
Temp, Op.
ROHS COMPLIANT
APPROVALS
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting in printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to
“Packaging Information”: www.vishay.com/doc?28139 or end of catalog
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the
printed-circuit board:
• For pitches ≤ 15 mm capacitors shall be mechanically fixed by the leads
• For longer pitches the capacitors shall be mounted in the same way and the body clamped
Space Requirements on Printed Circuit-Board
The maximum length and width of film capacitors is shown in drawing:
• Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned
• Product height with seating plane as given by “IEC 60717” as reference: h
Storage Temperature
• Storage temperature: T
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of
86 to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
Document Number: 28114
Revision: 23-Jan-09
SAFETY APPROVALS Y2
EN 60384-14 (ENEC)
(= IEC 60384-14 ed-3)
UL1414 and CSA-C22.2 No 1
antenna coupling
UL1283
CSA-E384-14-95
CB-Test Certificate
The Enec-approval together with the CB-Certificate replace all national marks of the following countries (they have already signed the
ENEC-Agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg;
Netherlands; Norway; Portugal; Slovenian; Spain; Switzerland and United Kingdom.
16
stg
= - 25 °C to + 40 °C with RH maximum 80 % without condensation
Interference Suppression Film Capacitors
Eccentricity
VOLTAGE
300 Vac
300 Vac
300 Vac
250 Vac
300 Vac
MKP Radial Potted Type
For technical questions, contact: RFI@vishay.com
l
max.
= I + 0.3 mm
1 nF to 470 nF
1 nF to 470 nF
1 nF to 470 nF
1 nF to 470 nF
1 nF to 470 nF
®
VALUE
b
h
max.
max.
max.
= b + 0.3 mm
≤ h + 0.3 mm or
≤ h’ + 0.3 mm
CBA116
Vishay BCcomponents
FILE NUMBERS
FI 2008062
MKP 338 6 Y2
E112471
E109565
1377022
FI 5265
www.vishay.com
375