FKS2D021001B00KSSD WIMA, FKS2D021001B00KSSD Datasheet

CAPACITOR, 10NF, 100V

FKS2D021001B00KSSD

Manufacturer Part Number
FKS2D021001B00KSSD
Description
CAPACITOR, 10NF, 100V
Manufacturer
WIMA
Datasheet

Specifications of FKS2D021001B00KSSD

Capacitor Dielectric Type
Polyester
Capacitance Tolerance
± 20%
Voltage Rating
100VDC
Life Time @ Temperature
300000 Hours @ 40°C
Capacitor Case Style
Radial
No. Of Pins
2
Capacitor
RoHS Compliant
Capacitance
0.01µF
34
Polyester (PET) Film and Foil
Capacitors for Pulse Applications
in PCM 5 mm
˜
˜
For general DC-applications e.g.
˜
˜
Dielectric:
Polyethylene-terephthalate (PET) film
Capacitor electrodes:
Metal foil
Internal construction:
Encapsulation:
Solvent-resistant, flame-retardent plastic
case with epoxy resin seal, UL 94 V-0
Terminations:
Tinned wire.
Marking:
Colour: Red. Marking: Silver.
Epoxy resin seal: Yellow.
Special Features
Typical Applications
Construction
Pulse duty construction
According to RoHS 2002/95/EC
Coupling
Decoupling
WIMA FKS 2
Plastic film
Metal foil electrode
Terminating wire
(mean value: 8 x 10
Measuring voltage: 100 V/1 min.
Test voltage: 2 U
rated voltage
Pull test on leads:
10 N in direction of leads according to
IEC 60068-2-21
Vibration:
6 hours at 10 ... 2000 Hz and 0.75 mm
displacement amplitude or 10 g in
accordance with IEC 60068-2-6
Low air density:
1kPa = 10 mbar in accordance with
IEC 60068-2-13
Bump test:
4000 bumps at 390 m/sec
accordance with IEC 60068-2-29
Capacitance range:
1000 pF to 0.047 mF (E12-values on request)
Rated voltages:
100 VDC, 250 VDC, 400 VDC
Capacitance tolerances:
± 20%, ±10%, ±5%
Operating temperature range:
–55+ C to +100+ C
Test specifications:
In accordance with IEC 60384-11
and EN 130 100
Climatic test category:
55/100/56 in accordance with IEC
Insulation resistance at +20+ C:
& 3 x 10
Maximum pulse rise time:
1000 V/
Electrical Data
Mechanical Tests
m
4
sec for pulses equal to the
r
, 2 sec.
5
M¸)
2
in
Dissipation factors at +20+ C: tan
Voltage derating:
A voltage derating factor of 1.25 % per K
must be applied from +85+ C for DC
voltages and from +75+ C for AC
voltages.
Reliability:
Operational life > 300 000 hours
Failure rate < 5 fit (0.5 x U
Available taped and reeled.
Detailed taping information and graphs
at the end of the catalogue.
For further details and graphs please
refer to Technical Information.
Packing
100 kHz
10 kHz
at f
1 kHz
C ! 0.047 mF
! 7 x 10
! 15 x 10
! 20 x 10
r
and 40+ C)
-3
-3
-3
d
D

Related parts for FKS2D021001B00KSSD

FKS2D021001B00KSSD Summary of contents

Page 1

... WIMA FKS 2 Polyester (PET) Film and Foil Capacitors for Pulse Applications in PCM 5 mm Special Features ˜ Pulse duty construction According to RoHS 2002/95/EC ˜ Typical Applications For general DC-applications e.g. ˜ Coupling Decoupling ˜ Construction Dielectric: Polyethylene-terephthalate (PET) film Capacitor electrodes: Metal foil ...

Page 2

... WIMA FKS 2 Continuation General Data 100 VDC/63 VAC* Capacitance W H 1000 pF 2.5 6.5 1500 „ 2.5 6.5 2200 „ 2.5 6.5 3300 „ 2.5 6.5 4700 „ 2.5 6.5 6800 „ 2.5 6.5 0. 7.5 0.015 „ 3.5 8.5 0.022 „ 4.5 8.5 0.033 „ ...

Page 3

... Temperature/time graph for the maximum permissible solder bath temperature for the wave soldering of through-hole WIMA capacitors WIMA Environmental Policy All WIMA capacitors, irrespective of whether through-hole devices or SMD, are made of environmentally friendly materials. Neither during manufacture nor in the product itself any toxic sub- stances are used, e.g. – ...

Page 4

Typical Dimensions for Taping Configuration Diagram 2: PCM 10/15 mm Designation Symbol PCM 2.5 taping Carrier tape width W 18.0 p0.5 for hot-sealing Hold-down tape width W 6.0 0 adhesive tape Hole position W 9.0 p0.5 1 ...

Related keywords