B82498B1222J EPCOS Inc, B82498B1222J Datasheet - Page 14
![INDUCTOR, 0805 CASE, 2.2UH](/photos/25/97/259734/42419624_sml.jpg)
B82498B1222J
Manufacturer Part Number
B82498B1222J
Description
INDUCTOR, 0805 CASE, 2.2UH
Manufacturer
EPCOS Inc
Specifications of B82498B1222J
Inductance Tolerance
± 5%
Dc Resistance Max
1.7ohm
Dc Current Rating
130mA
Resonant Frequency
200MHz
Q @ Vr F
20
Core Material
Ferrite
Inductor Case Style
0805
No. Of Pins
2
Inductance
2200nH
Svhc
No SVHC (18-Jun-2010)
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
B82498B1222J000
Manufacturer:
EPCOS
Quantity:
60 000
Part Number:
B82498B1222J000
Manufacturer:
EPCOS/爱普科斯
Quantity:
20 000
7
7.1
The rated voltage V
component at temperatures between the lower category temperature T
temperature T
7.2
The test voltage V
test duration in the course of final inspection (100% end of line testing). This test may be repeated
once as an incoming goods inspection test.
7.3
The rated current l
the nominal operating conditions.
For components with 1, 2 or 3 lines, the rated current is specified for simultaneous flow of a current
of this value through all lines.
During ac operation, higher thermal loads may be caused due to waveforms which deviate from a
pure sine wave. Where necessary, such cases must be taken into consideration.
7.4
The rated current may be exceeded briefly. Details on permissible currents and load duration can
be obtained upon request.
7.5
Saturation effects (e.g in the ferrite cores used) may occur when high-energy pulses are applied to
the components and these may lead to impaired interference suppression. The maximum permis-
sible voltage-time integral area is used to characterize the pulse handling capability of chokes. For
standard components a range from 1 to 10 mVs can be assumed. More specific data can be ob-
tained upon request.
7.6
At ambient temperatures above the operating temperature stated in the data sheet, the operating
current must be reduced according to the derating curve.
7.7
The rated inductance L
measured at the frequency f
General Technical Information
Electrical characteristics
Rated voltage V
Test voltage V
Rated current I
Overcurrent
Pulse handling capability
Current derating I
Rated inductance L
max
.
T
R
is the ac or dc voltage which may be applied to the component for the specified
is ac or dc current at which the component may be continuously operated under
R
is the maximum ac or dc voltage which can be continuously applied to the
T
R
R
R
is the inductance which has been used to designate the choke, as
op
L
.
R
/ I
R
22
04/00
min
and the upper category