1582 1000UH 0.1A FERROPERM, 1582 1000UH 0.1A Datasheet - Page 15

• Manufacturer Part Number: 1582 1000UH 0.1A
• Description: INDUCTOR, AXIAL, 1000UH, 0.1A
• Manufacturer: FERROPERM

Specifications of 1582 1000UH 0.1A

• Inductance Tolerance: ± 10%
• Dc Resistance Max: 30ohm
• Dc Current Rating: 100mA
• Resonant Frequency: 3MHz
• Q @ Vr F: 85
• Core Material: Ferrite
• Inductor Case Style: Axial Leaded
• No. Of: RoHS Compliant
• Inductance: 1000µH
• No. Of Pins: 2
• Dc Current Max: 0.1A
• Rohs Compliant: Yes

UK3
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel [phone] Fax [phone]
If you already have inductor designs, we will be pleased to quote for their manufacture.
Just send us your drawings!
If you would like us to design inductors to meet your requirements, please send us the
following information. If you do not have all the information available, please just give
what you can.
1.
Switched Mode Power Supply). Please give as much information as you can.
2.
inductor.
3.
4.
5.
6.
7.
8.
9.
FOR ENERGY STORAGE CHOKES (INDUCTORS):
10.
FOR ALL OTHER INDUCTORS:
10.
11.
12.
13.
Specify the application. (For example, Energy Storage Choke for a
Specify the maximum dimensions of the space you have available for the
Specify if you require surface mounting or through-hole mounting.
If you have a preference for a particular hardware design (for example rod or
toroidal), please state it.
Specify your estimated requirements of quantities and delivery dates both
for short term and long term. This is important because it may influence what
hardware is specified for the design.
If you have a target or maximum price level, please state it.
Specify maximum average direct current flow.
Specify maximum peak current flow.
Sketch or describe any alternating current waveform (other than interference
current). If the waveform is variable, please specify the extremes.
Specify inductance and widest acceptable tolerance at near zero current, at
maximum average current and at maximum peak current.
EITHER specify inductance and widest acceptable tolerance
OR specify minimum required impedance at particular frequencies or sketch
a graph of minimum required impedance versus frequency.
Specify if common mode (current compensated) design is required.
(Examples of common mode chokes are shown on page 13.)
Specify maximum working voltage between windings if common mode.
If this working voltage is a.c., please specify the frequency.
from FERROPERM UK Ltd.
CUSTOM INDUCTORS
FERROPERM
http://www.ferroperm.co.uk
Email
[e-mail]
Page 15