1582 4.7UH 1.3A FERROPERM, 1582 4.7UH 1.3A Datasheet - Page 15

• Manufacturer Part Number: 1582 4.7UH 1.3A
• Description: INDUCTOR, 4.7UH, 1.3A, 10%, 95MHZ
• Manufacturer: FERROPERM

Specifications of 1582 4.7UH 1.3A

• Inductance: 4.7µH
• Inductance Tolerance: ± 10%
• Dc Resistance Max: 0.12ohm
• Dc Current Rating: 1.3A
• Self Resonant Frequency: 95MHz
• Q Factor: 50
• Inductor Case Style: Axial Leaded
• No. Of Pins: 2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

UK3
If you already have inductor designs, we will be pleased to quote for their manufac-
ture. Just send us your drawings!
If you would like us to design inductors to meet your requirements, please send us
the following information. If you do not have all the information available, please just
give what you can.
1.
Mode Power Supply). Please give as much information as you can.
2.
inductor.
3.
4.
toroidal), please state it.
5.
short term and long term. This is important because it may influence what hardware
is specified for the design.
6.
7.
8.
9.
current). If the waveform is variable, please specify the extremes.
FOR ENERGY STORAGE CHOKES (INDUCTORS):
10.
maximum average current and at maximum peak current.
FOR ALL OTHER INDUCTORS:
10.
a
versus frequency.
11.
(Examples of common mode chokes are shown on page 13.)
12.
13.
Specify the application. (For example, Energy Storage Choke for a Switched
Specify the maximum dimensions of the space you have available for the
Specify if you require surface mounting or through-hole mounting.
If you have a preference for a particular hardware design (for example rod or
Specify your estimated requirements of quantities and delivery dates both for
If you have a target or maximum price level, please state it.
Specify maximum average direct current flow.
Specify maximum peak current flow.
Sketch or describe any alternating current waveform (other than interference
Specify inductance and widest acceptable tolerance at near zero current, at
EITHER specify inductance and widest acceptable tolerance
OR specify minimum required impedance at particular frequencies or sketch
Specify if common mode (current compensated) design is required.
Specify maximum working voltage between windings if common mode.
If this working voltage is a.c., please specify the frequency.
Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel [phone] Fax [phone]
from FERROPERM UK Ltd.
CUSTOM INDUCTORS
graph of minimum required impedance
15