P11A2V0FRSY00T0047 Vishay, P11A2V0FRSY00T0047 Datasheet - Page 5

• Manufacturer Part Number: P11A2V0FRSY00T0047
• Description: POTENTIOMETER, 10K POTENTIOMETER, 10K
• Manufacturer: Vishay
• Series: PA11r

Specifications of P11A2V0FRSY00T0047

• Variable Rotary Conductive Plastic: RESISTANCE, TRACK
• Power Rating: 0.5W
• Case Style: PANEL MOUNT
• Temp, Op. Max: 125(DEGREE C)
• Temp, Op. Min: -55(DEGREE C)
• Rohs Compliant: YES

P11, PA11
Vishay Sfernice
OPTIONS
MODULES : RS ON/OFF SWITCH
The position of each module is free.
RS and RSI rotary switches are housed in a standard P11
module size 12.7 x 12.7 x 5.08 mm (.5" x .5" x .2"). They have
the same terminal styles as the assembled electrical
modules.
Switch actuation is described as seen from the shaft end.
D: means actuation in maximum CCW position
F: means actuation in maximum CW position
The switch actuation travel is 25° with a total mechanical
travel of 300° ± 5°.
MODULES :
PUSH/PUSH SWITCH RSPP
MOMENTARY/PUSH SWITCH RSMP
The switches are manufactured by ITT, F.U. series (NE18
series available on request).
They have to be the last element of potentiometer and are
linked to electrical module by an interface.
RSPP and RSMP switches are available only with P11/PA11
T-Q or 7 series not with P11/PA11 V or 2 series.
Options :
2 reversing switches F2 4 reversing switches F4
6 reversing switches F6 8 reversing switches F8
Available with shafts R (T), G (Q), CR (7) others shafts on
request.
Not available with panel sealed option.
Number of modules before the switch limited to 3 modules.
VALLEY DETENTS
The valley detents mechanism is housed in a standard P11
module. Up to 21 detents position available.
Count detents as follows : 1 for CCW position, 1 for full CW
position, plus the other positions forming equal resistance
increments (linear taper) - not equal angles.
Available now : CVID - CVIF - CVIM
www.vishay.com
98
CAUTION: Because of the switch actuation
travel, the potentiometer total electrical travel is
reduced to 240° ± 10°
CVID
CVIM
SWITCH MODULES
RSI CHANGEOVER SWITCH
CV3 - CV11 - CV21
CVIF
Modular Potentiometers with Cermet (P11) or
ß
CV11
Conductive Plastic Elements (PA11)
For technical questions, contact: [e-mail]
ß
ß = + 15°
=
270°
n- 1
1
RSD
RSF
3
CCW POSITION
RSD SINGLE POLE SWITCH, NORMALLY OPEN
In full CCW position, the contact between 1 and 3 is open. It is made at
the beginning of the travel in CW direction.
RSF SINGLE POLE SWITCH, NORMALLY OPEN
In full CW position, the contact between 1 and 3 is open. It is
made at the beginning of the travel in CCW direction.
RSID SINGLE POLE CHANGEOVER
In full CCW position, the contact is made between 3 and 2
and open between 3 and 1. Switch actuation (CW direction)
reverses these positions.
RSIF SINGLE POLE CHANGEOVER
In full CW position, the contact is made between 1 and 2 and
open between 1 and 3. Switch actuation (CCW direction)
reverses these positions.
RSPP F2 : PUSH/PUSH SWITCH WITH TWO
REVERSING SWITCHES
Idle position : the contact is made between 1 and 2 and a and
b. It is open between 2 and 3 and b and c.
Pushed position: the contact is made between 2 and 3 and b
and c. It is open between 1 and 2 and a and b.
Not available on P11V and P11-2.
On request for P11Q and P11-7.
Switching Power max.
Switching Current max.
Max. Current Through Element
Contact Resistance
Dielectric
Strength
Max. Voltage Operation
Insulation Resistance Between Contacts
Life at P max.
Minimal Travel
Operating Temperature
SWITCH SPECIFICATIONS
MODEL
ELECTRICAL DIAGRAM
RSID
1
2
3
Terminal to Terminal
Terminal to Bushing
CW POSITION
1
RSIF
2
3
IDLE POSITION PUSHED POSITION
- 40°C to + 85°C
0.25 A 250 Vu
1000 V RMS
2000 V RMS
0.5 A 30 V =
actuations
RS - RSI
62.5 VA u
a
1
15 VA =
250 V u
10
10 000
30 V =
30mW
Document Number: 51031
2 A
25°
6
MW
b
2
RSPP F2
Revision: 05-Aug-04
- 20°C + 70°C
1500 V RMS
2000 V RMS
actuations
3.3 mm to
F2 to F8
100 000
50 VA u
250 V u
4.7 mm
0.5 A u
100mW
10
c
3
2 A
3
MW