P11S1A0BGSY00502KL Vishay, P11S1A0BGSY00502KL Datasheet - Page 12

• Manufacturer Part Number: P11S1A0BGSY00502KL
• Description: POTENTIOMETER, 5K, LOG
• Manufacturer: Vishay
• Series: P11r

Specifications of P11S1A0BGSY00502KL

• Track Resistance: 5kohm
• Track Taper: Logarithmic
• No. Of Turns: 1
• Resistance Tolerance: ± 20%
• Voltage Rating: 350V
• Power Rating: 500mW
• No. Of Gangs: 1
• Svhc: No SVHC (15-Dec-2010)
• Resistor Element: RoHS Compliant
• Resistance: 5 KOhms
• Tolerance: 10 %
• Termination Style: SMD/SMT
• Taper: Audio
• Number Of Turns: 1
• Element Type: Cermet
• Shaft Type: Flatted / D
• Operating Temperature Range: - 55 C to + 125 C
• Product: Panel Mount Potentiometers
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Document Number: 51031
Revision: 21-Feb-11
P11 OPTION: CONCENTRIC SHAFTS
The CC concentric shaft versions allies the total flexibility of the P11 modular
system to the advantage of having two separate shafts.
The outer 6 mm or 1/4" or 1/8" dia. shaft drives the modules situated
immediately behind the panel, before the spacer module.
The inner 3 mm or 1/8" or 0.07" dia. shaft drives the modules situated after the
spacer module.
Spacer is available with a choice of two spacer thickness:
5.08 mm designations or 2.54 mm designation. See dimensional drawing
ORDERING INFORMATION (First order only for special code creation)
2.54: Mechanical spacer of 2.54 mm
5.08: Mechanical spacer of 5.08 mm
Customer should define witch modules is driven by each shaft (see example of ordering information at the end of the data sheet)
P11 OPTION: DETENT MODULES
The detents mechanism is housed in a standard P11 module.
Up to 21 detent positions available.
Count detents as follows: 1 for CCW position, 1 for full CW
position, plus the other positions forming equal resistance
increments (linear taper) - not equal angles.
Available: CVID - CVIF - CVIM
Mechanical endurance: 10 000 cycles
ORDERING INFORMATION (First order only for special code creation)
CV1M
CV1M J84
CV1D
CV1F
CV3
CV11
CV21
P11 OPTION: NEUTRAL MODULES “EN”
Neutral or screen module is housed in a standard P11 module.
It is used as a screen between two electrical modules.
The leads can be connected to ground.
ORDERING INFORMATION (First order only for special code creation)
EN
BUSHING
CODE
V
F
A
CV1M
CV3 - CV11 - CV21
5.08
EN
1 detent at half travel
CV1M with accuracy of center point ± 2 % (all tapers except S)
1 detent at CCW position
1 detent at CW position
3 detents
11 detents
21 detents
Neutral module
DIAMETER
6.35 (1/4")
3.17 (1/8")
6
Cermet (P11S) or Conductive Plastic Elements (P11A)
See also Application Note:
OUTER SHAFT DIAMETER
12.5 mm Modular Panel Potentiometer
LENGTH L
12.7 (1/2")
16
16
For technical questions, contact:
www.vishay.com/doc?51001
SHAFT STYLE
R
R
R
CVID
[e-mail]
DIAMETER
3.17 (1/8")
1.8 (0.07")
and
3
CVIM
www.vishay.com/doc?52029
INNER SHAFT DIAMETER
l
L
CVIF
5.08
LENGTH l
22.2 (7/8")
28.5
28.5
Vishay Sfernice
Spacer module
P11S, P11A
CV1 1
2.54
SHAFT STYLE
www.vishay.com
R
R
R
=
= 270 °
n - 1
+ 15 °
12