JA1N200P104AA Honeywell Sensing and Control, JA1N200P104AA Datasheet - Page 11

• Manufacturer Part Number: JA1N200P104AA
• Description: POT, CARBON, 100KOHM, 10%, 2.25W
• Manufacturer: Honeywell Sensing and Control
• Series: Jr

Specifications of JA1N200P104AA

• Track Resistance: 100kohm
• Track Taper: Linear
• Resistance Tolerance: ± 10%
• Power Rating: 2W
• Potentiometer Mounting: Panel
• No. Of Gangs: 1
• Adjustment Type: Side
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: [phone] ● www.stevenengineering.com
Sensing element with
Custom Subassemblies
CP ink on substrate
Let us help you design your position sensing
solution at no extra charge.*
And ask about our Value-Add options.
Call
Fax your request to
*Subject to terms and volume
If
needs to transform
a mechanical movement
into an electrical signal,
we can help.
Your
800-874-1874
• In agricultural heavy machinery, the position of a control lever is sensed electrically, rather
• In some industrial valve controls, a position sensor is integrated with a microcontroller to translate a joystick
• The movement of an electronic gas foot pedal rotates a wiper contacting a resistance element. A computer
• For some transmission assemblies, a position sensing element tracks the movement of the shift lever in the car.
controller reads the input, causing a motor to rotate the butterfly assembly in the carburetor. A second sensor
element is attached to the motor to feed back its position so the controller can constantly track the position of
the motor with respect to the gas pedal.
As it is shifted, a motor arrangement in the transmission changes the gears as required, eliminating the direct
cable connection. These new systems are highly reliable and the weight reduction and ease of assembly provide
substantial cost reduction for the end consumer.
than requiring a direct mechanical connection to control the implement, for a more compact and
user-friendly interface between the operator and the implement. A feedback sensor on the imple-
ment provides the controller information regarding the implement’s position. The controller can then
take corrective action when necessary.
position into serial digital data modulated onto a master control bus. Previously, the valve control manufacturer
assembled a separate potentiometer, control module and housing. Clarostat now provides the entire electronic
control system in an extremely compact integrated package.
application
Wiper contact
800-223-5138
• For a fuel level sensor in a gasoline tank, the custom-designed element,
• Manufacturers of the windshield wiper delay control on the steering arm of
• Many lever or handle controls, joy stick controllers, vane adjusters and valve
(often called a “fuel card”) is mounted at the pivot point of a toilet bowl type
float. The float moves up and down as a function of the amount of fuel in the
tank. The pivot arm is attached to a mechanism that moves a wiper contact
across the resistor surface, translating the float position into an electrical
signal that causes the meter on the dashboard to indicate fuel capacity.
most cars purchase the resistor element and assemble it with various switch
features into a decorative package. Instead, Clarostat can provide the
complete assembly, ready to install.
actuators can use a much less costly and easier to assemble electrical position
sensing connection to eliminate a direct cable from the lever to the mechani-
cal device or to provide feedback to a computer controller.
Position Sensors
• A mobile RV stove
New Thru-hole
or
functions more efficiently
when the gas/air mixture is
optimized. A feedback pot attached to the gas valve
knob allows the controller to set the optimum
airflow for the desired flame setting.