MCTC0525B1003T5E MULTICOMP, MCTC0525B1003T5E Datasheet - Page 3

• Manufacturer Part Number: MCTC0525B1003T5E
• Description: RESISTOR, THIN FILM, 100KOHM, 100mW, 0.1%
• Manufacturer: MULTICOMP
• Series: TC05r

Specifications of MCTC0525B1003T5E

• Resistance: 100kohm
• Resistance Tolerance: ± 0.1%
• Power Rating: 100mW
• Voltage Rating: 100V
• Resistor Element Material: Thin Film
• Temperature Coefficient: ± 25ppm/°C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Performance specifications
Marking on the Resistors:
±0.1% Tolerance : 4 Digits, the first three digits are singnificant figures of resistance and the fourth digit denoted number of
zeros.Letter"R" is for decimal point.
Temperature coefficient
Insulation resistance
Terminal bending
Soldering heat
Load life in humidity
Short time overload
Dielectric withstanding
voltage
Load Life
Solderability
TC05 Series Thin Film Resistors
Characteristics
1000
4.7Ω to 2MΩ ±25 PPM/°C
Resistance change rate is ±(0.5% + 0.05Ω)
>1,000MΩ
No evidence of flashover mechanical
damage, arcing or insulation break down.
±(0.2% + 0.05Ω)
Resistance change rate is ±(0.2% + 0.05Ω)
Resistance change rate is ±(0.3% + 0.05Ω)
Resistance change rate is
±(0.2% + 0.05Ω)
>7KΩ ±(0.5% + 0.05Ω)
95% coverage minimum
100Ω
Limits
Page <3>
2741
Natural resistance change per temperature degree
centigrade
R
R
R
Permanent resistance change after the application of a
potential of 2.5 times RCWV for 5 seconds.
Dip the resistor into a solder bath having a
temperature of 260°C ±5°C and hold it for 10 ±1
seconds
Resistance change after 1000 hours
(1.5 hours "on", 0.5 hour "off" ) at RCWV
in a humidity chamber controlled at
40°C ±2°C and 90 to 95% relative humidity
Permanent resistance change after 1000 hours
operating at RCWV, with duty cycle of
(1.5 hours"on", 0.5 hour"off") at 70°C ±2°C ambient.
Test temperature of solder
Dipping them solder
Apply 100V DC between protective coating and
termination for 1 minimum, then measure
Apply maximum. overload voltage for 1 minute.
Twist of test board
2
1
2
-R
1
/ R
: Resistance value at room temperature (t
: Resistance value at room temperature plus
1
100°C (t
(t
2
Test Methods (JIS C 5201-1)
2.74KΩ
-t
1
) x 10
2
).
6
(PPM/°C)
: Y/X = 5/90mm for 10
seconds.
: 260°C ±5°C
: 2 ±0.5 seconds.
02/05/08 V1.1
1
)