B41142A7476M EPCOS Inc, B41142A7476M Datasheet - Page 10

• Manufacturer Part Number: B41142A7476M
• Description: CAPACITOR, ELECTROLYTIC, SMD, 35V, 47UF
• Manufacturer: EPCOS Inc

Specifications of B41142A7476M

• Capacitor Application: Low Impedance
• Capacitor Dielectric Type: Aluminium Electrolytic
• Capacitance: 47µF
• Capacitance Tolerance: ± 20%
• Voltage Rating: 35V
• Esr: 0.12ohm
• Life Time @: RoHS Compliant

11
12
13
Please read Cautions and warnings and
Important notes at the end of this document.
Cautions and warnings
Do not apply excessive force to the leads and terminals. Do not move the capacitor after sol-
dering it onto the PC board and do not carry the PC board by gripping the capacitor. Observe
the following rules to prevent undue stress to the capacitor:
a Do not tilt or bend the capacitor after soldering.
b Ensure that the terminal spacing matches the corresponding hole spacing on the PC
The aluminum case is not insulated from the cathode. Do not place a conductor under the
aluminum capacitors on the PC board as this may cause a short circuit. The case and top of
capacitors used in switched mode power supplies have a high-voltage-resistant heat shrink
sleeve to ensure safe usage.
The leads of capacitors with a case diameter exceeding 14 mm cannot be used for fixing.
board.
10
08/08