Technical specifications
Maximum continuous operating voltage:
Operating frequency:
Rated currents:
Approvals by rated current:
High potential test voltage:
Protection category:
Temperature range (operation and storage):
Design corresponding to:
Flammability corresponding to:
MTBF @ 40°C/230V (Mil-HB-217F):
The FN 9222E IEC inlet filter combines an
IEC inlet and mains filter with excellent filter
attenuation in a small form factor and
integrated earth line choke. Choosing the
FN 9222E product line brings you the rapid
availability of a standard filter associated with
the necessary safety acceptances. Standard
IEC connector filters are a practical solution
helping you to pass EMI system approval in
a short time. A wide selection on amperage
ratings, output connections, mounting
possibilities and filters for medical appli-
cations are designed to offer you the desired
solution.
General performance IEC inlet fi lter
with earth line choke
■
■
■
■
■
■
250VAC, 50/60Hz
dc to 400Hz
1 to 15A @ 50°C
1 to 10A (ENEC, CQC)
1 to 15A (UL, CSA)
P –> E 2000VAC for 2 sec (standard types)
P –> E 2500VAC for 2 sec (B types)
P –> N 1000VAC for 2 sec
IP40 according to IEC 60529
-25°C to +85°C (25/85/21)
UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
UL 94V-2 or better
1,610,000 hours
Features and benefits
■
■
■
■
■
■
■
Rated currents up to 15A
Excellent performance/size ratio
Integrated earth line choke
Optional medical versions (B type)
Snap-in versions (S and S1 type)
Optional wide mounting flanges
Exceptional conducted attenuation
performance, based on chokes with high
saturation resistance and excellent thermal
behavior.
Rear/front or snap-in mounting.
Optional low leakage currents for medical
applications.
Wide mounting flanges available.
Different output connections offering
maximum flexibility for assembly.
Without earth line choke see FN 9222
data sheet.
Custom-specific versions are available on
request.
IEC inlet fi lters
FN 9222E
Approvals
(CQC approval pending)
Typical electrical schematic
N
E
P
Typical applications
■
■
■
■
■
■
Line
Portable electrical and electronic
equipment
Small to medium-sized machines and
household equipment
Single-phase power supplies, switch-mode
power supplies
Test and measurement equipment
Medical equipment
Rack mounting equipment
Cx
R
2xL1
L2
2xCy
Load
N‘
E‘
P‘