B32676E8685K EPCOS Inc, B32676E8685K Datasheet - Page 27
![Film Cap 6,8UF 10% 875V MKP BOXED](/photos/27/89/278906/b32676e3655k_sml.jpg)
B32676E8685K
Manufacturer Part Number
B32676E8685K
Description
Film Cap 6,8UF 10% 875V MKP BOXED
Manufacturer
EPCOS Inc
Series
MKP B32676r
Datasheet
1.B32674D8474K.pdf
(32 pages)
Specifications of B32676E8685K
Capacitance
6.8µF
Voltage - Ac
400V
Voltage - Dc
875V
Dielectric Material
Polypropylene, Metallized
Tolerance
±10%
Operating Temperature
-40°C ~ 105°C
Mounting Type
Through Hole
Package / Case
Radial
Size / Dimension
1.654" L x 1.102" W (42.00mm x 28.00mm)
Height
1.673" (42.50mm)
Termination
PC Pins
Lead Spacing
1.476" (37.50mm)
Features
AC and Pulse
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Esr (equivalent Series Resistance)
-
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
495-2992
B32676E8685K000
B32676E8685K000
Cautions and warnings
The table below summarizes the safety instructions that must always be observed. A detailed de-
scription can be found in the relevant sections of the chapters "General technical information" and
"Mounting guidelines".
Topic
Storage conditions
Flammability
Resistance to
vibration
Please read Cautions and warnings and
Important notes at the end of this document.
Do not exceed the upper category temperature (UCT).
Do not apply any mechanical stress to the capacitor terminals.
Avoid any compressive, tensile or flexural stress.
Do not move the capacitor after it has been soldered to the PC board.
Do not pick up the PC board by the soldered capacitor.
Do not place the capacitor on a PC board whose PTH hole spacing differs from the specified
lead spacing.
Do not exceed the specified time or temperature limits during soldering.
Avoid external energy inputs, such as fire or electricity.
Avoid overload of the capacitors.
Safety information
Make sure that capacitors are stored within the
specified range of time, temperature and humidity
conditions.
Avoid external energy, such as fire or electricity
(passive flammability), avoid overload of the
capacitors (active flammability) and consider the
flammability of materials.
Do not exceed the tested ability to withstand
vibration. The capacitors are tested to
IEC 60068-2-6.
EPCOS offers film capacitors specially designed
for operation under more severe vibration regimes
such as those found in automotive applications.
Consult our catalog "Film Capacitors for
Automotive Electronics".
Page 27 of 32
MKP DC link
high power series
B32674 ... B32678
Reference chapter
"General technical
information"
4.5
"Storage conditions"
5.3
"Flammability"
5.2
"Resistance to vibration"