T-55563D104J-LW-A-ADN Optrex America Inc, T-55563D104J-LW-A-ADN Datasheet - Page 23
![no-image](/images/no-image-200.jpg)
T-55563D104J-LW-A-ADN
Manufacturer Part Number
T-55563D104J-LW-A-ADN
Description
TFT Displays & Accessories 10.4 SVGA LED 1200nit LVDS
Manufacturer
Optrex America Inc
Datasheet
1.T-55563D104J-LW-A-ADN.pdf
(25 pages)
Specifications of T-55563D104J-LW-A-ADN
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
12. HANDLING PRECAUTIONS FOR TFT-LCD MODULE
Please pay attention to the followings in handling TFT-LCD products;
(1) ASSEMBLY PRECAUTION
g. Please do not touch metal frames with bare hands and soiled gloves. A color change of the metal
OPTREX Confidential
b. Please design display housing in accordance with the following guide lines.
c. Please do not push or scratch LCD screen surface with anything hard. And do not soil LCD
d. Please wipe off LCD screen surface with absorbent cotton or soft cloth in case of it being soiled.
e. Please wipe off drops of adhesives like saliva and water on LCD screen surface immediately.
f. Please do not take a LCD module to pieces and reconstruct it. Resolving and reconstructing
h. Please handle metal frame carefully because edge of metal frame is very sharp.
a. Please mount the LCD module by using mounting hole with a screw clamping torque less than
frames can happen during a long preservation of soiled LCD modules.
(a) Housing case must be designed carefully so as not to put stresses on LCD and not to wrench
(b) Under high temperature environment, performance and life time of LED may heavily
(c) Keep sufficient clearance between LCD module back surface and housing when the LCD
(d) When some parts, such as, FPC cable and ferrite plate, are installed underneath the LCD
(e) Design the LED driver location and connector position carefully so as not to give stress to
(f) Keep sufficient clearance between LCD module and the others parts, such as inverter and
screen surface by touching with bare hands.
They might damage to cause LCD screen surface variation and color change.
modules may cause them not to work well.
(g) To avoid local elevation/decrease of temperature, considering location of heating element,
0.5 Nm. Please do not bend or wrench the LCD module in assembling. Please do not drop, bend
or twist the LCD module in handling.
heat release, thermal design should be done.
module.
shorten. When you design with our LCD product, please consider radiating heat and
ventilation for good heat management.
module is mounted. Approximately 1.0mm of the clearance in the design is recommended
taking into account the tolerance of LCD module thickness and mounting structure height
on the housing.
module, still sufficient clearance is required, such as 0.5mm. This clearance is, especially, to
be reconsidered when the additional parts are implemented for EMI countermeasure.
LED backlight cable.
speaker so as not to interfere the LCD module. Approximately 1.0 mm of the clearance in
the design is recommended.
(23/25)
T-55563D104J-LW-A-ADN_02_00