PV10-12R-Q Panduit Corp, PV10-12R-Q Datasheet - Page 4

• Manufacturer Part Number: PV10-12R-Q
• Description: RING TERMINAL 10-12 AWG
• Manufacturer: Panduit Corp
• Series: Pan-Term®r
• Type: One-Holer

Specifications of PV10-12R-Q

• Terminal Type: Circular
• Stud/tab Size: 1/2 Stud
• Thickness: 0.040" (1.02mm)
• Width - Outer Edges: 0.720" (18.29mm)
• Length - Overall: 1.460" (37.10mm)
• Mounting Type: Free Hanging (In-Line)
• Termination: Crimp
• Wire Gauge: 10-12 AWG
• Insulation: Insulated
• Color: Yellow
• Contact Material: Copper
• Contact Finish: Tin, 100µin (2.54µm)
• Insulation Diameter: 0.225" (5.72mm)
• Material - Insulation: Vinyl
• Angle: Straight
• Brand/series: PV10 Series
• Contact Plating: Tin
• Diameter, Insulation: 0.225 "
• Insulation Type: Vinyl
• Length, Overall: 1.46 "
• Material, Contact: Copper
• Package Quantity: 50
• Primary Type: Ring
• Size, Stud: 1⁄2 "
• Special Features: Brazed Seam, Barrel
• Width, Overall: 0.72 "
• Wire Size: 12-10 AWG
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: PV10-12R-L; PV10-12R-L; Q4337443

A4
Non-Insulated Terminals and Disconnects
Insulated and Non-Insulated Parallel Splices
Crimping Guidelines for PANDUIT
Terminals,Disconnects,Splices and Wire Joints
(continued)
A. Locate terminal in appropriate wire gauge crimp die pocket
B. Rotate terminal so tongue is level with crimp die.
C. Insert properly stripped wire (based on recommendations on
D. Squeeze tool handles firmly to perform the electrical crimp.
A. Locate parallel splice in appropriate wire gauge crimping die
B. Insert properly stripped wire (based on recommendations
C. Squeeze tool handles firmly. (See Note 2 page A6)
D. An insulation crimp is not required on an insulated
Steps A & B
Step A
with indenter centered on barrel seam.
package label) into terminal until a minimum of 1/32" of wire
extends beyond the terminal barrel.
(See Note 2 page A6)
pocket and position tool on the center of the splice.
on package label) into each end of the parallel splice.
parallel splice.
Complete Crimp
Steps C & D
Step B
®
P
Complete Crimp
AN
Steps C & D
-T
ERM
®