LTL-307YLC Lite-On Electronics, LTL-307YLC Datasheet - Page 6

• Manufacturer Part Number: LTL-307YLC
• Description: Standard LED - Through Hole Yellow Diffused
• Manufacturer: Lite-On Electronics

Specifications of LTL-307YLC

• Led Size: T-1 3/4
• Illumination Color: Yellow
• Lens Color/style: Diffused
• Operating Voltage: 1.8 V
• Wavelength: 588 nm
• Luminous Intensity: 3.7 mcd
• Operating Current: 2 mA
• Lens Dimensions: 5 mm
• Lens Shape: Dome
• Maximum Operating Temperature: + 100 C
• Minimum Operating Temperature: - 55 C
• Mounting Style: Through Hole
• Viewing Angle: 50 deg
• Package / Case: T-1 3/4
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

6. Drive Method
7. ESD (Electrostatic Discharge)
BNS-OD-C131/A4
Part No. : LTL-307YLC
Suggestions to prevent ESD damage:
ESD-damaged Leeds will exhibit abnormal characteristics such as high reverse leakage current, low
forward voltage, or “no light up” at low currents. To verify for ESD damage, check for “light up” and
Vf of the suspect LEDs at low currents.
Static Electricity or power surge will damage the LED.
The Vf of “good” LEDs should be >2.0V@0.1mA for InGaN product and >1.4V@0.1mA for AlInGaP product.
connected in parallel in an application, it is recommended that a current limiting resistor be
incorporated in the drive circuit, in series with each LED as shown in Circuit A below.
An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs
(A) Recommended circuit
(B) The brightness of each LED might appear different due to the differences in the I-V characteristics
Use a conductive wrist band or anti- electrostatic glove when handling these LEDs
All devices, equipment, and machinery must be properly grounded
Work tables, storage racks, etc. should be properly grounded
plastic lens as a result of friction between LEDs during storage and handing
Use ion blower to neutralize the static charge which might have built up on surface of the LEDs
of those LEDs
Circuit model A
InGaN / Sapphire
AlInGaP
InGaN / SiC
Chip ESD level
LED
LITE-ON TECHNOLOGY CORPORATION
P r o p e r t y o f L i t e - O n O n l y
Machine Mode
100 V
200 V
600 V
Circuit model B
Human Body Model
1000 V
300 V
500 V
LED
Page :
6
of
8