D-436-83 Tyco Electronics, D-436-83 Datasheet - Page 2

• Manufacturer Part Number: D-436-83
• Description: CONN SPLICE BUTT 16-20AWG BLUE
• Manufacturer: Tyco Electronics
• Series: D-436r

Specifications of D-436-83

• Terminal Type: Butt Splice, Inline, Individual Openings
• Number Of Wire Entries: 2
• Termination: Crimp
• Wire Gauge: 16-20 AWG
• Insulation: Fully Insulated
• Features: Heat Shrink
• Color: Blue, Blue Stripe
• Connector Type: Butt Splice
• Insulator Color: Blue
• Termination Method: Crimp
• Wire Size (awg): 20-16
• Contact Material: Copper
• Contact Plating: Nickel
• Insulator Material: PVDF
• Terminal Insulation: PVDF
• Chemical Resistant: No
• Minimum Shrink Temperature: + 135 C
• Maximum Temperature: + 150 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 1195133-3; 650127-000

APPLICATION
1. These parts are designed to provide an immersion resistant in-line splices of 1 to 1 wires falling within
2. Parts will meet all performance requirements of MIL-S-81824/1, EN 3373-001 and EN 3373-012 when installed
3. Acceptance sampling shall be in accordance with Paragraph 4.6.1 of MIL-S-81824.
4. Packing and packaging shall be in accordance with Section 5, Level C, of MIL-S-81824.
5. This document takes precedence over documents referenced herein.
ASSEMBLY PROCEDURE:
a. Slide sealing sleeve onto one of the wires to be spliced.
b. Strip wires 5/16” to 11/32”.
c. Insert one wire into barrel of crimp splicer and crimp using a Raychem AD-1377 crimp tool. Repeat for the
d. Center sealing sleeve over the splice.
e. Apply heat, using an approved heat source, first to one of the inserts and then the other. Heat should be applied
Unless otherwise specified dimensions are in millimeters.
Inches dimensions are in between brackets.
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
DRAWN BY:
If this document is printed it becomes uncontrolled. Check for the latest revision.
as outlined below.
the size range listed on sheet 1, and having nickel plated conductors and insulations rated for at least 135 C.
other wire.
until insert melts and flows axially along the wire.
mforonda
ANGLES: N/A
ROUGHNESS IN
MICRON
D-436-82
D-436-83
D-436-84
Name
Part
REPLACES:
Menlo Park, CA 94025, USA
Tyco Electronics Corporation
D001298
305 Constitution Drive
Tyco Electronics reserves the right to amend
this drawing at any time. Users should
evaluate the suitability of the product for
their application.
SPECIFICATION CONTROL DRAWING
Prod
Rev.
C
C
C
DCR NUMBER:
Equivalent Size
D020028
M81824/1-1
M81824/1-2
M81824/1-3
MIL Spec
Raychem
Products
DOCUMENT NO.:
DATE:
PROD. REV.
SEE TABLE
Range
26-20
20-16
16-12
Wire
25-Jan-02
TITLE :
D-436-82/-84
(NICKEL PLATED CRIMPS)
IN-LINE SPLICE SEALING
SCALE:
None
SYSTEM, 1 TO 1
Wgt. Lbs/Mpc
1.02
1.61
2.72
max
SIZE:
A
DOC ISSUE:
2
SHEET:
2 of 2