D-436-42 Tyco Electronics, D-436-42 Datasheet - Page 2

• Manufacturer Part Number: D-436-42
• Description: CONN SPLICE BUTT 22-24AWG BLUE
• Manufacturer: Tyco Electronics

Specifications of D-436-42

• Terminal Type: Butt Splice, Inline, Individual Openings
• Number Of Wire Entries: Varies by Wire Size
• Termination: Crimp
• Wire Gauge: 22-24 AWG
• Insulation: Fully Insulated
• Features: Heat Shrink
• Color: Blue, Blue Stripe
• Connector Type: Butt Splice
• Insulator Color: Blue
• Termination Method: Crimp
• Wire Size (awg): 24-22
• Contact Material: Copper
• Contact Plating: Tin
• Insulator Material: PVDF
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 5-1195131-0; 650072-000

1.0
2.0
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
DRAWN BY:
If this document is printed it becomes uncontrolled. Check for the latest revision.
M. FORONDA
TEST ASSEMBLIES
The test assemblies for qualification testing shall be 3 to 3 in-line splices made in wire conforming
to MIL-W-81044/12 or MIL-W-16878/4. The assemblies shall be divided equally between the maximum
and minimum wire size as shown below:
Assembly
D-436-42
D-436-43
The qualification sample shall consists of 35 assemblies and 8 uninstalled sleeves.
1.1
QUALIFICATION TESTING:
.1
2.2
2.3
ANGLES: N/A
ROUGHNESS IN
MICRON
Acceptance Testing:
Acceptance sampling shall be in accordance with ANSI/ASQC Z1.4, Inspection Level S-4. The
Acceptable Quality Level shall be 4.0 for all defects.
Acceptance tests shall consist of visual and dimensional examination.
All sleeves shall be tested for compliance with Sheet 1 in regard to:
Property
Material and Appearance
Dimensions
Test Group A: Ten assemblies shall pass the post conditioning tests after conditioning in the
sequence shown:
Post Conditioning
Insulation Resistance
Altitude Immersion
Insulation Resistance
Dielectric Withstanding
Conditioning
Altitude Immersion
Immersion
Temperature Cycling
Moisture Resistance
Fluid Immersion
Heat Aging
Test Group B: Ten Assemblies:
REPLACES:
Menlo Park, CA 94025, USA
Tyco Electronics reserves the right to amend this
drawing at any time. Users should evaluate the
suitability of the product for their application.
Tyco Electronics Corporation
N/A
305 Constitution Drive
SPECIFICATION CONTROL DRAWING
Minimum
24
22
DCR NUMBER:
D001303
Test Method
Visual Examination
MIL-I-23053, Paragraph 4.6.3
Requirement
5000 M @500V d-c
5000 M @500V d-c
2.5Kv (rms) for 1 min.
Parameters
Condition C
-65 C to 150 C (5 cycles)
Step 7b not required
MIL-H-5606, MIL-L-7808
96 hours @200 C
75,000 ft.
75,000 ft.
Maximum
Raychem
22
18
Products
DOCUMENT NO.:
DATE:
PROD. REV.
SEE TABLE
05-Dec.-00
MIL-W-81044, Par. 4.7.5.2
MIL-C-26500, Par. 4.7.21
MIL-W-81044, Par. 4.7.5.2
MIL-W-81044, Par. 4.7.5.1
MIL-C-26500, Par. 4.7.21
Method 104*
Method 102*
Method 106*
Method 108*
MIL-T-7928, Par. 4.8.8
TITLE :
D-436-42/-43
IN-LINE SPLICE SEALING
Test Method
Test method
SCALE:
SYSTEM, MULTI-WIRE
None
SIZE:
A
DOC ISSUE:
1
SHEET:
2 of 4