E39-S55 Omron, E39-S55 Datasheet - Page 2
![Photoelectric Sensors - Industrial SLIT FOR E3L 0.1MM](/photos/15/82/158296/e39f_sml.jpg)
E39-S55
Manufacturer Part Number
E39-S55
Description
Photoelectric Sensors - Industrial SLIT FOR E3L 0.1MM
Manufacturer
Omron
Specifications of E39-S55
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Discontinued Mar. 30, 2009; Use E3Z-L Laser
E3L
Specifications
Note: In consideration of vibration and other environmental and mounting conditions, the sensing distance values for the E3L-2RC4 are
very conservative. If these conditions can be minimized, longer sensing distances are possible. Please see excess gain and operating
range curves for more accurate sensing ranges.
Part number
Method of detection
Supply voltage
Current consumption
Sensing distance
Light source
Detectable object type
Diameter of projected spot
Directional angle
Operation mode
Sensitivity adjustment
Mutual interference protection
Control
output
Alarm
output
Circuit
protection
Indicators
Materials
DC
solid-
state
DC
solid-
state
Type
Max. load
Response time
Type
Max. load
Residual voltage
Response time
Output short-
circuit
DC power supply
reverse polarity
Lens
Case
E3L-2RC4 (See Note.)
Through-beam type
12 to 24 VDC, ±10% max. ripple peak-to-peak
50 mA max.
10 m (32.8 ft) with no
aperture; 9 m (29.52 ft) with
3 mm aperture; 6 m (19.68 ft) with 0.1 mm dia. aperture
with 2 mm aperture; 3 m
(9.84 ft) with 1 mm aperture;
aperture; 1 m (3.28 ft) with
0.5 mm aperture; 30 cm
(11.81 in) with 0.1 mm
aperture
Visible red, pulse modulated
laser diode (λ=670 nm)
480 µW max.,
Class II FDA/IEC
4 mm (0.16 in) dia. object
minimum without aperture;
With aperture - object
minimum is same as
aperture size
With 4 mm dia. emitter, no aperture, at a distance of
2 m (6.56 ft), the incident light is 20 mm (0.79 in) in diameter
Emitter: 2° max., Receiver: 20° max.
Light-ON/Dark-ON, wire selectable
Light-ON: + red, - black; Dark-ON: - red, + black
Adjustable
Standard level
NPN type, open collector
NPN type: 100 mA max.
1 ms max. (both ON and OFF)
NPN (E3L-
50 mA, 24 VDC
1 V
Output turns ON after 100 ms delay when light receiving signal level is within unstabe
zone.
Provided
Provided
Light Incident (red LED), Stable Operation (green LED)
Plastic, PMMA
Diecast zinc
2 m (6.56 ft) with 0.85 mm
(This table continues on the next page)
E4-50); PNP (E3L-2B4-50)
3
E3L-2 4-50
2 m (6.56 ft) with 0.85 mm
dia. aperture; 20 cm (7.9 in)
Infrared, pulse modulated laser diode (λ=780 nm) 25 µW
max., Class I FDA/IEC
0.5 mm (0.02 in) dia. object
minimum with 0.85 mm dia.
aperture 0.1 mm (0.003 in)
dia. object minimum with
0.10 mm dia. aperture
NPN type, constant current source (E3L-
PNP type, open collector (E3L-2B4-50)
NPN type: Load (relay, sink) logic: 80 mA max.
PNP type: Load (relay, source) logic: 80 mA max.
Voltage (source) logic: 1.5 to 3 mA
E3L-DS50E4-50
Diffuse reflective
40 mA max.
20 to 50 cm (7.9 to 19.7 in)
with 2 x 2 mm (0.09 x 0.09 in)
white mat paper
Opaque, translucent objects
2 x 2 mm
With 4 mm dia. emitter, at a
distance of 50 cm (19.7 in)
from the emitter, the incident
light is 2 mm (0.08 in) in dia.
3 ms max. (both ON and OFF)
E4-50)
E3L