PS9552L1-AX CEL, PS9552L1-AX Datasheet - Page 19

• Manufacturer Part Number: PS9552L1-AX
• Description: High Speed Optocouplers 1GBTGate Drv Couplr
• Manufacturer: CEL

Specifications of PS9552L1-AX

• Output Device: Integrated Photo IC
• Maximum Baud Rate: 1 MBps
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

<R>
(4) Cautions
2. Cautions regarding noise
USAGE CAUTIONS
1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static
2. Board designing
3. Make sure the rise/fall time of the forward current is 0.5 s or less.
4. In order to avoid malfunctions, make sure the rise/fall slope of the supply voltage is 3 V/ s or less.
5. Avoid storage at a high temperature and high humidity.
output transistor may enter the on state, even if the voltage is within the absolute maximum ratings.
• Fluxes
electricity when handling.
(1) By-pass capacitor of more than 0.1 F is used between V
(2) In older to avoid malfunctions and characteristics degradation, IGBT collector or emitter traces should not
(3) Pins 1, 4 (which is an NC
Be aware that when voltage is applied suddenly between the photocoupler’s input and output at startup, the
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
Unconnected pins should not be used as a bypass for signals or for any other similar purpose because this
distance between the leads of the photocoupler and capacitor is no more than 10 mm.
be closed to the LED input.
open.
may degrade the internal noise environment of the device.
*1 NC: Non-Connection (No Connection)
*1
pin) can either be connected directly to the GND pin on the LED side or left
Data Sheet PN10589EJ07V0DS
PS9552,PS9552L1,PS9552L2,PS9552L3
CC
and GND near device. Also, ensure that the
19