F17723332000 Vishay, F17723332000 Datasheet - Page 5

• Manufacturer Part Number: F17723332000
• Manufacturer: Vishay
• Type: Suppressionr

Specifications of F17723332000

• Tolerance (+ Or -): 10%
• Voltage: 310VAC
• Temp Coeff (dielectric): PLYE
• Mounting Style: Through Hole
• Construction: Radial
• Failure Rate: Not Required
• Seated Plane Height: 11mm
• Product Diameter (mm): Not Requiredmm
• Product Height (mm): 11mm
• Product Depth (mm): 5mm
• Product Length (mm): 17.5mm
• Lead Spacing (nom): 15mm
• Lead Diameter (nom): 0.6mm
• Operating Temp Range: -40C to 110C
• Capacitance: .033uF
• Package / Case: Not Required
• Lead Free Status / RoHS Status: Compliant

F 1772-2 310 V-X2
Interference Suppression Film Capacitors
Vishay BCcomponents
MKT Radial Potted Type
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting in printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to “Packaging Information”.
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that stand-off pips are in good contact with the printed-circuit
board:
• For pitches ≤ 15 mm capacitors shall be mechanically fixed by the leads
• For larger pitches the capacitors shall be mounted in the same way and the body clamped
Space Requirements On Printed-Circuit Board
The maximum length and width of film capacitors is shown in the drawing:
• Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned.
• Product height with seating plane as given by “IEC 60717” as reference: h
≤ h + 0.3 mm or h
≤ h’ + 0.3 mm
max.
max.
Eccentricity
b
= b + 0.3 mm
max.
l
=
max.
l + 0.3 mm
Storage Temperature
• Storage temperature: T
= - 25 °C to + 40 °C with RH maximum 80 % without condensation
stg
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of
86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
Document Number: 28161
For technical questions, contact:
[e-mail]
www.vishay.com
Revision: 25-Mar-09
347