NCP15XM472K03RC Murata, NCP15XM472K03RC Datasheet - Page 18

• Manufacturer Part Number: NCP15XM472K03RC
• Description: Thermistors - NTC 4.7K OHM 10%
• Manufacturer: Murata
• Type: NTCr
• Series: NCPr

Specifications of NCP15XM472K03RC

• Description Of Terminals: Leadless
• Package / Case: SMD
• Mounting Style: Surface Mount
• Pin Count: 2
• Screening Level: Automotive
• Sensitivity Index: 3500K
• Resistance @ 25c: 4.7kohm
• Percentage Of Resistance Tolerance @ 25c: ±10
• Accuracy: ±2
• Operating Temperature Min Deg. C: -40C
• Operating Temperature Max Deg. C: 125C
• Product Length (mm): 1mm
• Product Height (mm): 0.5mm
• Product Depth (mm): 0.5mm
• Resistance: 4.7 KOhms
• Tolerance: 10 %
• Operating Temperature Range: - 40 C to + 125 C
• Current Rating: 0.46 mAmp
• Power Rating: 100 mW
• Lead Free Status / RoHS Status: Compliant

!Note
!Note
This product is designed for application in an
ordinary environment (normal room temperature,
humidity and atmospheric pressure).
Do not use under the following conditions because all
these factors can deteriorate the product
characteristics or cause failures and burn-out.
1. Corrosive gas or deoxidizing gas
Be sure to provide an appropriate fail-safe function
on your product to prevent secondary damages that may
be caused by the abnormal function or the failure of
our product.
To keep solderability of product from declining, the
following storage condition is recommended.
1. Storage condition:
2. Storage term:
Use this product within the specified temperature
range.
Higher temperature may cause deterioration of the
characteristics or the material quality of this
product.
The ceramic of this product is fragile, and care must
be taken not to load a excessive press-force or not to
give a shock at handling.
Such forces may cause cracking or chipping.
(Chlorine gas, Hydrogen sulfide gas, Ammonia gas,
Sulfuric acid gas, Nitric oxide gas, etc.)
Temperature -10 to +40 degree C
Humidity less than 75%RH (not dewing condition)
Use this product within 6 months after delivery by
first-in and first-out stocking system.
!Caution (Storage and Operating Conditions)
!Caution (Others)
Notice (Storage and Operating Conditions)
Notice (Rating)
Notice (Handling)
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
2. Volatile or flammable gas
3. Dusty conditions
4. Under high or low pressure
5. Wet or humid locations
6. Places with salt water, oils, chemical liquids or
7. Strong vibrations
8. Other places where similar hazardous conditions
3. Handling after unpacking:
4. Storage place:
organic solvents
exist
After unpacking, reseal product promptly or store
it in a sealed container with a drying agent.
Do not store this product in corrosive gas
(sulfuric acid gas, chlorine gas, etc.) or in
direct sunlight.
Chip Type !Caution/Notice
R44E9.pdf 05.4.13
17
4