EH1500SJETTS-1.000M Ecliptek, EH1500SJETTS-1.000M Datasheet

Standard Clock Oscillators 1 MHZ

EH1500SJETTS-1.000M

Manufacturer Part Number
EH1500SJETTS-1.000M
Description
Standard Clock Oscillators 1 MHZ
Manufacturer
Ecliptek
Type
Crystal Oscillatorr
Series
EH15r
Datasheet

Specifications of EH1500SJETTS-1.000M

Operating Supply Voltage (typ)
3.3
Output Level
LVCMOS
Symmetry Max
60%
Operating Temp Range
-40C to 85C
Screening Level
Industrial
Frequency Stability
±100
Package / Case
SMD
Load Capacitance
30pF
Product
XO
Frequency
1 MHz
Termination Style
SMD/SMT
Minimum Operating Temperature
- 40 C
Maximum Operating Temperature
+ 85 C
Duty Cycle (max)
60 %
Mounting Style
SMD/SMT
Supply Voltage (max)
3.6 Volts
Supply Voltage (min)
3 Volts
Lead Free Status / RoHS Status
Compliant
ELECTRICAL SPECIFICATIONS
Nominal Frequency
Frequency Tolerance/Stability
Aging at 25°C
Operating Temperature Range
Supply Voltage
Input Current
Output Voltage Logic High (Voh)
Output Voltage Logic Low (Vol)
Rise/Fall Time
Duty Cycle
Load Drive Capability
Output Logic Type
Pin 1 Connection
Tri-State Input Voltage (Vih and Vil)
Absolute Clock Jitter
One Sigma Clock Period Jitter
Start Up Time
Storage Temperature Range
ENVIRONMENTAL & MECHANICAL SPECIFICATIONS
ESD Susceptibility
Fine Leak Test
Flammability
Gross Leak Test
Mechanical Shock
Moisture Resistance
Resistance to Soldering Heat
Resistance to Solvents
Solderability
Temperature Cycling
Vibration
EH1500SJETTS-1.000M
Series
RoHS Compliant 3.3V Plastic J-Lead SMD LVCMOS
High Frequency Oscillator
www.ecliptek.com | Specification Subject to Change Without Notice | Rev E 2/11/2011 | Page 1 of 4
Frequency Tolerance/Stability
±100ppm Maximum
1.000MHz
±100ppm Maximum (Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency Stability over the
Operating Temperature Range, Supply Voltage Change, Output Load Change, 1st Year Aging at 25°C,
Shock, and Vibration)
±5ppm/year Maximum
-40°C to +85°C
3.3Vdc ±0.3Vdc
35mA Maximum (No Load)
2.7Vdc Minimum, IOH = -8mA
0.5Vdc Maximum, IOL = +8mA
6nSec Maximum (Measured at 20% to 80% of waveform)
50 ±10(%) (Measured at 50% of waveform)
30pF Maximum
CMOS
Tri-State (High Impedance)
70% of Vdd Minimum to enable output, 20% of Vdd Maximum to disable output, No Connect to enable
output.
±250pSec Maximum, ±100pSec Typical
±50pSec Maximum, ±40pSec Typical
10mSec Maximum
-55°C to +125°C
MIL-STD-883, Method 3015, Class 1, HBM: 1500V
MIL-STD-883, Method 1014, Condition A (Internal Crystal Only)
UL94-V0
MIL-STD-883, Method 1014, Condition C (Internal Crystal Only)
MIL-STD-202, Method 213, Condition C
MIL-STD-883, Method 1004
MIL-STD-202, Method 210, Condition K
MIL-STD-202, Method 215
MIL-STD-883, Method 2003
MIL-STD-883, Method 1010, Condtion B
MIL-STD-883, Method 2007, Condition A
Operating Temperature Range
-40°C to +85°C
EH15 00 SJ ET
Package
Duty Cycle
50 ±10(%)
TS -1.000M
Pin 1 Connection
Tri-State (High Impedance)
RoHS
Nominal Frequency
1.000MHz

Related parts for EH1500SJETTS-1.000M

EH1500SJETTS-1.000M Summary of contents

Page 1

... EH1500SJETTS-1.000M Series RoHS Compliant 3.3V Plastic J-Lead SMD LVCMOS High Frequency Oscillator Frequency Tolerance/Stability ±100ppm Maximum ELECTRICAL SPECIFICATIONS Nominal Frequency 1.000MHz Frequency Tolerance/Stability ±100ppm Maximum (Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, 1st Year Aging at 25°C, Shock, and Vibration) Aging at 25° ...

Page 2

... EH1500SJETTS-1.000M MECHANICAL DIMENSIONS (all dimensions in millimeters) 5.080 ±0.203 7.620 ±0.203 0.510 ±0.203 Suggested Solder Pad Layout All Dimensions in Millimeters 1.27 (X4) 3.0 (X4) Solder Land 5.8 (X4) 3.81 All Tolerances are ±0.1 www.ecliptek.com | Specification Subject to Change Without Notice | Rev E 2/11/2011 | Page 0.25 MIN 4 9.8 ...

Page 3

... EH1500SJETTS-1.000M OUTPUT WAVEFORM & TIMING DIAGRAM 80% of Waveform 50% of Waveform 20% of Waveform V OL Fall Time Test Circuit for CMOS Output + + + Power Voltage Supply Meter _ _ Note 1: An external 0.1µF low frequency tantalum bypass capacitor in parallel with a 0.01µF high frequency ceramic bypass capacitor close to the package ground and V Note 2: A low capacitance (< ...

Page 4

... EH1500SJETTS-1.000M Recommended Solder Reflow Methods Max S T Min S Low Temperature Infrared/Convection 240°C T MAX to T (Ramp-up Rate Preheat - Temperature Minimum (T MIN Temperature Typical (T TYP Temperature Maximum (T MAX Time (t MIN) S Ramp-up Rate ( Time Maintained Above: - Temperature ( Time ( Peak Temperature ( Target Peak Temperature (T ...

Related keywords