5536510-2 TE Connectivity, 5536510-2 Datasheet - Page 4

• Manufacturer Part Number: 5536510-2
• Description: HARD METRIC CONNECTOR, RECEPTACLE, 48POS
• Manufacturer: TE Connectivity
• Type: Backplaner
• Series: Z-PACKr

Specifications of 5536510-2

• Pitch (mm): 2mm
• Gender: RCP
• Body Orientation: Right Angle
• Number Of Contact Rows: 4
• Number Of Contacts: 48POS
• Termination Method: Solder
• Mounting Style: Through Hole
• Contact Plating: Gold Over Nickel
• Voltage Rating Max: 30VAC
• Contact Material: Phosphor Bronze
• Housing Color: Natural
• Housing Material: Liquid Cryst Polymer
• Product Height (mm): 11.8mm
• Product Depth (mm): 20.45mm
• Product Length (mm): 23.88mm
• Connector Type: Backplane
• Row Pitch: 2mm
• Pitch Spacing: 2mm
• No. Of Contacts: 48
• Contact Termination: Right Angle Through Hole
• No. Of Rows: 4
• Rohs Compliant: Yes
• Number Of Rows: 4
• Number Of Positions / Contacts: 48
• Pitch: 2 mm
• Termination Style: Solder
• Product Type: Connector
• Pcb Mounting Orientation: Right Angle
• Post Type: Solder Post
• Module Type: Signal
• Voltage Rating (vac): 30
• Termination Post Length (mm [in]): 3.53 [0.139]
• Number Of Signal Positions: 48
• Sequencing: No
• Post Plating: Tin
• Centerline, Matrix (mm [in]): 2.00 x 2.00 [.079 x .079]
• Contact Type: Socket
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold (30)
• Connector Style: Receptacle
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C, Reflow solder capable to 245°C, Reflow solder capable to 260°C, Pin-in-Paste capable to 245°C, Pin-in-Paste capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Printed Circuit Board
• Application: Free-Board
• Lead Free Status / RoHS Status: Compliant

Rev C
Temperature life.
Mixed flowing gas.
NOTE
Test Description
Shall meet visual requirements, show no physical damage and shall meet requirements of
additional tests as specified in Test Sequence in Figure 3.
See Note.
See Note.
Figure 2 (end)
Requirement
TE Spec 109-43.
Subject mated samples in Test
Group 2 to temperature life at 70° C
for 1000 hours with electrical load
of 1 ampere for signal modules and
1.5 amperes for power modules.
TE Spec 109-43.
Subject mated samples in Test
Group 5 to temperature life at
105° C for 500 hours.
TE Spec 109-85-2.
Subject mated samples to
environmental class II for 14 days.
Procedure
108-1441
4 of 8