5536501-1 TE Connectivity, 5536501-1 Datasheet - Page 5

• Manufacturer Part Number: 5536501-1
• Description: HARD METRIC CONNECTOR, HEADER, 24POS
• Manufacturer: TE Connectivity
• Type: Backplaner
• Series: Z-PACKr

Specifications of 5536501-1

• Pitch (mm): 2mm
• Gender: HDR
• Body Orientation: Straight
• Number Of Contact Rows: 4
• Number Of Contacts: 24POS
• Termination Method: Solder
• Mounting Style: Through Hole
• Contact Plating: Gold
• Voltage Rating Max: 30VAC
• Contact Material: Phosphor Bronze
• Housing Material: Liquid Cryst Polymer
• Product Height (mm): 17mm
• Product Depth (mm): 15.8mm
• Product Length (mm): 11.88mm
• Connector Type: Backplane
• Row Pitch: 2mm
• Pitch Spacing: 2mm
• No. Of Contacts: 24
• Contact Termination: Through Hole
• No. Of Rows: 4
• Rohs Compliant: Yes
• Number Of Rows: 4
• Number Of Positions / Contacts: 24
• Pitch: 2 mm
• Termination Style: Solder
• Product Type: Connector
• Pcb Mounting Orientation: Vertical
• Post Type: Solder Post
• Module Type: Signal
• Mating Post Length (mm [in]): 6.50 [0.256]
• Pin Header Width (mm [in]): 16.00 [0.622]
• Voltage Rating (vac): 30
• Termination Post Length (mm [in]): 4.25 [0.167]
• Number Of Signal Positions: 24
• Sequencing: No
• Post Plating: Tin
• Centerline, Matrix (mm [in]): 2.00 x 2.00 [.079 x .079]
• Contact Type: Pin
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold (30)
• Connector Style: Plug
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C, Reflow solder capable to 245°C, Reflow solder capable to 260°C, Pin-in-Paste capable to 245°C, Pin-in-Paste capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Printed Circuit Board
• Application: Fixed-Board
• Lead Free Status / RoHS Status: Compliant

3.6.
4.
4.1.
Rev C
Product Qualification and Requalification Test Sequence
QUALITY ASSURANCE PROVISIONS
Qualification Testing
A.
NOTE
Sample Selection
1.
Examination of product
Termination resistance
Insulation resistance
Dielectric withstanding voltage
Temperature rise vs current
Vibration
Physical shock
Durability
Mating force
Unmating force
Thermal shock
Humidity-temperature cycling
Temperature life
Mixed flowing gas
(a) See paragraph 4.1.A.
(b) Numbers indicate sequence in which tests are performed.
(c)
(d) Precondition samples with 10 cycles durability.
(e) Precondition samples with 25 cycles durability.
(f)
(g) Signal connectors only.
(h) 70° C for 1000 hours, see Figure 2.
(I)
(m) Precondition samples with 5 cycles of durability (right angle headers only).
Signal connectors.
Signal connector housings and contacts shall be prepared in accordance with applicable
Instruction Sheets and shall be selected at random from current production. All test groups
shall consist of 5 connectors each of the largest available size. All tests requiring individual
contact measurements shall be conducted on 30 contacts randomly selected over the 5
connectors. Test groups 1, 2 and 3 shall be mounted on printed circuit boards designed to
accommodate vibration and physical shock fixturing providing a series circuit for all contacts
with access to measure termination resistance.
Test or Examination
Discontinuities shall not be measured. Energize at 18° C level for 100% loadings per Test
Specification 109-151.
Precondition samples with 250 cycles durability.
105° C for 500 hours, see Figure 2.
1,9
3,7
1
5
6
4
2
8
Figure 3
3(f)(h)
1,5
2,4
2
Test Sequence (b)
Test Group (a)
3(e)(m)
1,5
2,4
3
1,8
2,6
3,7
4
4
5
5(g)
4(d)
6(c)
5(I)
1,9
2,7
3,8
108-1441
5 of 8