27211218006 HARTING, 27211218006 Datasheet - Page 2

• Manufacturer Part Number: 27211218006
• Description: Hard Metric Connectors 10P FEMALE ANGLED SOLDER PINS BLUE
• Manufacturer: HARTING

Specifications of 27211218006

• Gender: F
• Contact Material: Copper Alloy
• Contact Plating: Gold
• Number Of Ports: 1Port
• Body Orientation: Right Angle
• Pitch (mm): 2mm
• Number Of Terminals: 10
• Housing Material: Polyester
• Mounting Style: Through Hole
• Termination Method: Solder
• Current Rating (max): 1.5A
• Lead Free Status / RoHS Status: Compliant
• Lead Free Status / RoHS Status: Compliant

00 .
04
The
with the requirements of IEC 61 076-4-107 and is
a compact and robust pcb-to-cable interface with
excellent data transmission properties for high-speed
networking and telecommunications.
All dimensions of the
dance with IEC 917 and IEEE P 1301 requirements,
which allows for easy implementation into both metric
and inch-based systems. In addition,
hot plugging as required by modern bus systems such
as CompactPCI, S-bus and VME.
pair and is therefore perfectly suited for modern
transmission
Differential Signals (see Fig. 1). The design of the
horizontally (parallel to the pcb), thus reducing the
skew at high frequencies and considering high signal
integrity.
Fig. 1: Eye diagram of a 1280 MBit signal (512 Bits)
The metal shells of the
guarantee for its superior performance in the EMI-
polluted environment (see Fig. 2).
Fig. 2: 360° screened-can construction with locking levers
connector allows differential pairs to be placed
allows data transmission up to 2 Gbit/s per
connector system of HARTING complies
connector system
protocols
such
connector are in accor-
as
connector are a
Low
supports
Voltage
To reach a screening attenuation of more than 50 dB
up to 1 GHz, HARTING offers brackets covering
each connector in conjunction with a gasket, which is
compressed between the bracket and the front panel
(see Fig. 3).
Fig. 3: 4 cavities bracket and gasket
Once plugged, the mated pair shows excellent mating
safety. Due to the locking levers on both sides of the
male connector, the connection withstands a pulling
force of up to 80 N (see Fig. 2).
The high temperature resistant material of the
female connector body supports the safe reflow
soldering process. For easy identification of female
modules, six different colours are available (see Fig. 4).
Fig. 4: Female modules
In addition to single connectors, HARTING provides
cable assemblies with unshielded twisted pairs or
with shielded twisted pairs for high speed applications
such as IEEE 1355. A crimping tool range for
terminating the male
General information
Bracket
Gasket
connectors is available.